Digital 3D print fileDownloads as STL3MF
Zip charm with a snap loop
A chunky name or initial charm for a school bag's zip pull. It clips on with a springy printed gate, so there is no metal ring or clasp to add.
- Clad 2 colours, 1 filament swapColours stacked in layers, like a clad coin: pause and swap filament where each colour starts. No AMS needed.
- One Strike One pieceComes off the plate ready to use, with nothing to put together.
What you download
zip-charm-Zoe.stlFor any slicer and any 3D printerzip-charm-Zoe.3mfA Bambu Studio project with the colours set
Digital files only. Nothing is posted: you print it yourself, for you or for your customers.
Single files and the Party pass and Season pass are for personal use and gifts. To sell prints you need an active Seller plan or Seller year pass; prints made while it is active stay yours to sell after it ends. The digital files themselves may never be shared or sold. Read the licence
- Size
- About 34 × 58 × 5 mm (3.4 × 5.8 cm) with the example text
- You type
- Name, Initial, Shape, plus 12 more options for fine-tuning
- Colours
- 2 parts (base, text), so it prints in 2 colours or as one
- Files
- STL for any slicer, plus a two-colour Bambu Studio project
Why sellers like it
- A snap loop with a springy gate: push the zip pull in and the gate springs shut behind it
- Five shapes: an initial breaking out of a ring, a bubble name, a round badge, a shield and a star
- 3.6 mm thick with 1 mm raised letters, tough enough for a school bag
- Or swap the snap loop for a plain hole and a split ring
- One name per line in a bulk order makes a set for a whole class (bubble name, badge or shield)
Clips on, stays on
School bags all look the same on the hooks outside a classroom. A charm on the zip with the child's name or initial picks theirs out at a glance, and it gives a plain bag a bit of personality. Most bag charms hang from a metal split ring or lobster clasp, which means buying hardware and fiddling it on. This one clips on by itself.
The loop above the charm has a thin springy gate on one side. Push the zip pull against it and the gate bends inwards, the pull slides in, and the gate springs back shut against a small stop. It prints flat in one piece with the rest of the charm, with a small gap round the gate so it moves freely straight off the bed.
Pick a big initial breaking out of a ring, the whole name in puffy bubble letters, or a round badge, shield or star with the initial and an optional name under it. If you'd rather use a split ring, switch to the plain hole.
Printing tips
- PETG is the best choice for the gate. With PLA, flex the gate gently a few times before clipping it on.
- Print with at least two walls and a 0.4 mm nozzle so the 1.2 mm gate prints as solid wall, not infill.
- A bright base with white letters reads best on a dark bag: blue and white, red and yellow, black and pink.
- Change filament at the top of the charm for the second colour; the loop stays in the base colour.
Selling tips
Sell them as a class set for a school trip or a birthday party, one per child in matching colours, so every bag on the bus is easy to tell apart. Initials in school or house colours make good end-of-term gifts too.
Questions about the snap zip charm
How does the snap loop work?
One side of the loop is a thin gate that bends inwards but not outwards. Press the zip pull, keyring or cord against the gate and it bends in to let it through, then springs back against a small stop at the top. Pulling from inside pushes the gate against the stop, so the charm stays on.
What can it clip onto?
Anything with a hole or loop that the 3 mm frame fits through: backpack zip pulls with a big hole, cord pulls, keyrings, D-rings and bag loops. Fine dress zips with a tiny hole are too small; use the hole option and a split ring for those.
How is it different from the name keychains?
The keychains hang from a hole and need a metal ring. The zip charm clips on and off by itself and is built thicker and chunkier for a child's bag, in shapes that hang straight from a zip.
Which filament should I use?
PETG is the most forgiving for the gate, because it bends further without cracking. PLA works too; keep the gate at 1.2 mm and flex it gently a few times after printing. If the gate fuses to the frame, raise gate_gap in All options.
How do I make one for every child?
On the Seller plan, paste the names one per line into a bulk order. You get a ZIP with one file per name, all in the same shape and colours.
Ideas for selling it
More in personalised print ideas by occasion. Pricing an order? Try the profit calculator and the other free maker tools.
Sellers also offer
Start selling the snap zip charm
Type your customer's text, send them the picture, download the print file.
Early Black Fridaythrough Nov 30 (US Pacific time)
The Seller plan at $12 $6 a month
For your first 3 months, then $12. Every design, bulk lists, and the right to sell your prints. Comes off at checkout, no code needed.