# Zip charm with a snap loop

> A chunky name or initial charm for a school bag's zip pull. It clips on with a springy printed gate, so there is no metal ring or clasp to add.

Web page: https://stlmint.app/designs/zip-charm

Personalise it in the studio: https://stlmint.app/app?p=zip-charm

## Details

- Category: [Bag and school tags](https://stlmint.app/designs/bag-tags.md)
- Price: $3 for a single file, or included in every pass and plan (Party pass $8 for 7 days, Season pass $20 for 90 days, Seller plan $12 per month, Seller year pass $99 for a year; see [pricing](https://stlmint.app/pricing.md))
- Size: About 34 × 58 × 5 mm (3.4 × 5.8 cm) with the example text
- You type: Name, Initial, Shape, plus 12 more options for fine-tuning
- Colours: 2 parts (base, text), so it prints in 2 colours or as one
- Files: STL for any slicer, plus a two-colour Bambu Studio project
- Printing: Clad (2 colours, 1 filament swap): Colours stacked in layers, like a clad coin: pause and swap filament where each colour starts. No AMS needed. One Strike (one piece): Comes off the plate ready to use, with nothing to put together.

## Why sellers like it

- A snap loop with a springy gate: push the zip pull in and the gate springs shut behind it
- Five shapes: an initial breaking out of a ring, a bubble name, a round badge, a shield and a star
- 3.6 mm thick with 1 mm raised letters, tough enough for a school bag
- Or swap the snap loop for a plain hole and a split ring
- One name per line in a bulk order makes a set for a whole class (bubble name, badge or shield)

## Good for

- School bags
- Pencil cases
- Party favours
- School trips
- Sports kit bags

## Clips on, stays on

School bags all look the same on the hooks outside a classroom. A charm on the zip with the child's name or initial picks theirs out at a glance, and it gives a plain bag a bit of personality. Most bag charms hang from a metal split ring or lobster clasp, which means buying hardware and fiddling it on. This one clips on by itself.

The loop above the charm has a thin springy gate on one side. Push the zip pull against it and the gate bends inwards, the pull slides in, and the gate springs back shut against a small stop. It prints flat in one piece with the rest of the charm, with a small gap round the gate so it moves freely straight off the bed.

Pick a big initial breaking out of a ring, the whole name in puffy bubble letters, or a round badge, shield or star with the initial and an optional name under it. If you'd rather use a split ring, switch to the plain hole.

## Printing tips

- PETG is the best choice for the gate. With PLA, flex the gate gently a few times before clipping it on.
- Print with at least two walls and a 0.4 mm nozzle so the 1.2 mm gate prints as solid wall, not infill.
- A bright base with white letters reads best on a dark bag: blue and white, red and yellow, black and pink.
- Change filament at the top of the charm for the second colour; the loop stays in the base colour.

## Selling tips

Sell them as a class set for a school trip or a birthday party, one per child in matching colours, so every bag on the bus is easy to tell apart. Initials in school or house colours make good end-of-term gifts too.

## Questions about the snap zip charm

### How does the snap loop work?

One side of the loop is a thin gate that bends inwards but not outwards. Press the zip pull, keyring or cord against the gate and it bends in to let it through, then springs back against a small stop at the top. Pulling from inside pushes the gate against the stop, so the charm stays on.

### What can it clip onto?

Anything with a hole or loop that the 3 mm frame fits through: backpack zip pulls with a big hole, cord pulls, keyrings, D-rings and bag loops. Fine dress zips with a tiny hole are too small; use the hole option and a split ring for those.

### How is it different from the name keychains?

The keychains hang from a hole and need a metal ring. The zip charm clips on and off by itself and is built thicker and chunkier for a child's bag, in shapes that hang straight from a zip.

### Which filament should I use?

PETG is the most forgiving for the gate, because it bends further without cracking. PLA works too; keep the gate at 1.2 mm and flex it gently a few times after printing. If the gate fuses to the frame, raise gate_gap in All options.

### How do I make one for every child?

On the Seller plan, paste the names one per line into a bulk order. You get a ZIP with one file per name, all in the same shape and colours.

## Ideas for selling it

- [Back-to-school name tags to 3D print and sell](https://stlmint.app/ideas/back-to-school.md)

## Sellers also offer

- [Team Bag Tag](https://stlmint.app/designs/team-bag-tag.md): A kit bag tag shaped like a match shirt, with the player's surname, squad number and team name. ($3 a file, 2 colours)
- [Name Keychain](https://stlmint.app/designs/name-keychain.md): A name in flowing script, ready for your keys. ($3 a file, 2 colours)
- [Two-Sided School Tag](https://stlmint.app/designs/two-sided-tag.md): Name and class on one side, who to call on the other. ($4 a file, 2 colours)
