Gifts for nurses to 3D print with their name: a stethoscope tag, a badge buddy and a heartbeat plaque

Personalised gifts for nurses that get used on shift: a name tag that snaps on to a stethoscope, a badge buddy with the role in large letters, and a plaque with the name over a heartbeat line. What each one is, what to ask before you order, and what to print it in.

Gifts for nurses to 3D print with their name: a stethoscope tag, a badge buddy and a heartbeat plaque

A gift for a nurse comes up at Christmas, as a thank you after a hospital stay, or when a friend starts a new job on a ward. Before choosing one that goes to work with them, it helps to know what a shift allows.

What to know first

  • Anything worn on shift gets cleaned. Kit that touches patients picks up bacteria. A 2018 University of Pennsylvania study of stethoscopes in an intensive care unit found all 40 in use were contaminated, mostly with Staphylococcus, and that no cleaning method reliably brought them back to the level of new ones. A tag on a stethoscope will be wiped with the same disinfectant wipes, so it has to cope with that.
  • Employers set the rules on ID. Name badges, role tags and their colours are usually set by the hospital. Anything printed to wear with a badge should be checked against the employer's uniform policy.
  • Measure, don't guess. Stethoscope tubing varies in width, so a tag that clips on needs the real measurement.
  • Gifts for home have no such rules. A plaque for the desk or shelf can be anything.

Here are three ideas, from a stethoscope name tag to a plaque for the desk.

A stethoscope name tag

On a ward every stethoscope looks like every other, and the one left on the desk at the end of a shift is hard to claim. The stethoscope ID tag snaps on to the tubing: the ring is open at one side, so the tube presses in and the ring springs back round it.

The tag carries a name and a line under it. The default reads EMMA J over RN; the line can be a ward, a job title or STUDENT NURSE. A small heart at the end can be on or off. The same tag suits doctors, paramedics and vet nurses.

The one thing to find out is the width of the tube. Measure across it where the tag will sit and set that width, anywhere from 7 to 14 mm. If you are buying it as a surprise, borrow the stethoscope for a minute or ask a colleague to measure it.

Print it in PETG. The ring flexes a little each time it goes on, and Prusa describes PETG as tough, less brittle and water resistant, so it copes with the flexing and the wiping better than PLA. It should be cleaned according to the workplace's infection control rules, with the same wipes used on the stethoscope.

A badge buddy with the role on it

A patient can't read the small print on an ID badge from the bed. The badge buddy tag hangs behind the badge on the same clip or reel and shows a band under it with the role in large letters: NURSE, RN, DOCTOR, STUDENT. It comes for a badge worn on its side or upright, and the band can be from 18 to 36 mm tall. A small line on the part hidden behind the badge can carry the wearer's name and ward.

It is not an official ID. Many employers issue their own role tags in set colours, so the wearer should check their employer's policy before wearing one that has been printed, and match its colours if it has them. Ask for the wording and the colour, then print the tag in that colour with the band in the second.

A heartbeat plaque for the desk

For a gift that stays at home, the heartbeat name plaque puts the name across the top, a heartbeat line running the width of it with a heart or a cross in the middle of the beat, and a line under it. The default says EMMA JOHNSON over RN . BSN . CLASS OF 2027. For a thank you, the bottom line can be a message instead: THANK YOU OLIVIA over THIRTY YEARS ON WARD 4 is one of the examples on the design page.

The heartbeat is a drawing of the familiar shape, not a clinical trace. It is there to say what the person does.

It stands on two slot-on feet or hangs on a wall, and comes 140 to 240 mm wide. White with a red heartbeat is the obvious colour pair; navy with white works too.

Which to choose

  • Christmas, from family or a friend: the plaque, with the name and the letters after it.
  • A small thank you, or a Secret Santa on the ward: the stethoscope tag.
  • A new job: the stethoscope tag with the new ward on its second line, and a badge buddy once they know what their employer allows.
  • A nurse graduation gift: the plaque with the class year. Graduation is a season of its own, with a class of names to print, and nurse graduation and pinning ceremony gifts covers it.

Printing them

All three print flat, face up, with no supports. The words are a second colour stacked on top, so you change filament once where they start; no multi-colour printer is needed. The plaque needs no glue.

For sellers

The tag and the badge buddy are small, so several fit on a plate. A unit may want the same badge buddy word many times over, and a ward's new starters each need their own stethoscope tag. On the Seller plan, paste the names one per line into a bulk order; bulk orders and the right to sell come with the Seller plan. The graduation and farewell gifts page has these designs next to other leaving and qualifying presents.

Planning what to make next? Browse personalised print ideas by occasion, or work out prices, party orders and colour changes with the free maker tools.

Take your next custom order in minutes

Type your customer's text, send them a picture to approve, download a print-ready file.

Start selling

Keep reading