How to hang a sign on a pop-up canopy at a market or craft fair
A banner on the front of a pop-up tent is hidden by the people at your table. Hang the sign out over the aisle instead: a bracket strapped to the canopy's leg, a sign with your name on both faces, and riders under it that say what's on today. All three printed on a home printer.
Most stalls at a farmers' market or a craft fair use the same kind of white pop-up canopy, 3 by 3 metres or 10 by 10 feet, and many hang their name on a vinyl banner along the front edge. It works from across the car park and nowhere else. Once there are people at your table, the banner is over their heads, and the people walking down the row see the side of your tent, not the front.
A sign that hangs out into the aisle, side-on, at head height, like an old shop's hanging sign, can be read by people walking towards you down the row. Before adding one, check two things: the market's rules on signs and how far anything may stick out into the aisle, and its rules on weighting the canopy, since a sign on an arm adds a little wind load at the corner.
What you need
- Something to hang it from. A canopy's leg is the obvious place: it's at the corner of the stall, right by the aisle. A stall sign bracket straps to the leg and reaches out up to 24 cm.
- A sign that reads both ways. A sign hanging side-on is seen from both ends of the row, so it needs its words on both faces. The hanging stall sign prints both faces in one piece.
- Something that changes. Your name stays the same, your stock doesn't. Sign riders hang under the sign: SOLD OUT, CARD OR CASH, PRE-ORDERS TAKEN.
Fixing the bracket to the leg
Don't drill a canopy's leg, and don't rely on tape. The bracket's upright sits flat against the leg and is held by two hook-and-loop straps or a pair of zip ties through notches in its edge: one above the arm, which takes the pull, and one near the bottom, which keeps it upright. It fits square, hexagonal and round legs, so it moves with you to a new canopy.
At a permanent pitch, a porch or a farm gate, screw it to the post instead: each notch has a countersunk hole.
Hanging the sign
S-hooks are better than a rigid fixing. A sign that can swing turns in a gust instead of levering the bracket off the leg. The bracket's arm has an eye every 20 mm, and the sign's eyes are a multiple of 20 mm apart, so any width of sign hangs level. The hooks print with the bracket and the riders.
At the end of the day the sign lifts off the hooks, the riders off the sign, and the bracket packs flat in the tote with them.
Wind
A pop-up canopy needs weights on every leg anyway: follow the canopy maker's instructions, and check the market's rules, as organisers often set a minimum weight per leg. The Methow Valley Farmers Market, for example, requires at least 24 lb on each leg and turns away vendors whose canopies aren't anchored; its guidance also quotes one canopy maker recommending 40 lb a corner on a 10 x 10 tent. Keep the sign under 30 cm wide, and take it down with the canopy's walls when the wind gets up. A printed sign and two riders weigh a few hundred grams, much less than a framed board.
Printing them
All three print flat with no supports, in two colours, on a single-spool printer: the colour changes at a set layer. PETG copes better than PLA with a hot car and a sunny afternoon: Prusa notes that PLA softens above about 60 °C and degrades under UV, while PETG suits most outdoor use below 80 °C. The bracket is printed on its side, so the arm's depth runs along the layers and the sign's weight pulls along them rather than across, which is the strongest way round for a print. Hang the sign on it at home before the first market. Black with gold lettering looks like wrought iron.
For sellers
If you have a printer and a stall, you have the sample. A stall-holder who asks where your sign came from is a possible customer, and a market has dozens of stalls. Sell the bracket, the sign and three riders as a set in the stall's colours, then new riders every season. Selling at craft fairs and markets covers running the stall itself, and the shops and market stalls ideas page has price spikes and offer signs for the same customers.
Planning what to make next? Browse personalised print ideas by occasion, or work out prices, party orders and colour changes with the free maker tools.