Kids' door name plaques: personalised door signs for a child's room
How to make and sell a personalised door sign for a kids' room: a child's name on a rocket, rainbow, dinosaur, crown, castle or whale, in three colours, with hidden keyholes, screws or tape. Themes, fonts, long names, printing and pricing sibling sets.
A name on the bedroom door marks a child's room as their own. It goes up for a new baby, a first birthday, a house move or when siblings stop sharing, and it is often a gift from grandparents or friends rather than something parents buy themselves.
What to know before you make one
- Doors set the size. Interior doors are narrow: the common sizes listed in Wikipedia's door article are 30 by 80 in (760 by 2,030 mm) for US room-to-room doors, 762 by 1,981 mm in the UK and 800 by 2,045 mm for internal doors in India. A sign around a quarter of the door's width, hung at eye height for an adult, reads from the hallway without crowding the handle.
- Contrast beats detail. The name is read from a few metres away, so a bold font and a strong colour difference between the name and what is behind it matter more than fine decoration.
- Not every door can be drilled. Rented homes and painted doors often call for mounting tape instead of screws, so the back should work both ways.
- Spelling is final. A child's name has unusual spellings more often than an adult's, so get it in writing.
What a kids' door name plaque looks like
The kids' door plaque is a picture first and a sign second. The child's name goes on one of six shapes:
- Rocket: blasting off to the right, with the name along its body, fins at the back and a flame out of the nozzle.
- Rainbow: arching over a long cloud, with the name on the cloud.
- Dinosaur: a friendly long-necked one with spines down its back and the name on its side.
- Crown: sitting on a ribbon banner with swallowtail ends, the name on the ribbon.
- Castle: two towers and a gatehouse with flags, the name on the battlement wall.
- Whale: round, tail up, with a spout from its head and the name on its side.
The name sits on a rounded outline in a second colour, like a sticker, so it reads clearly from across the room. The same colour picks out details such as the rocket's fins, the dinosaur's spines and the castle's roofs.
Who buys a personalised door sign for a kids' room
- New parents and their families, for the nursery door, often around a naming ceremony. Our new baby gifts ideas page has more for this buyer.
- Families moving house or splitting a shared room, when a child gets their own room for the first time.
- Birthday gift buyers, especially for ages two to eight. A plaque in the child's favourite theme is a safe present.
- Parents of siblings, who want one plaque per door in matching colours or a different picture for each child.
- Playschools and nurseries, for each child's cubby, or for room names like BUTTERFLIES on a classroom door.
Size and thickness
The plaque is about 200 mm wide by default, which is right for a standard bedroom door. You can set the width anywhere from 140 mm (for a cupboard or a playschool cubby) to 300 mm (for a big statement door). The height follows the picture: at 200 mm wide the rocket is about 105 mm tall and the rainbow about 140 mm.
The picture is 5 mm thick, with the details and outline 1 mm above it and the name another 0.8 mm on top.
Fonts and long names
The name shrinks to fit the space on the picture and grows to fill it if it is short, so you do not need to resize anything by hand. Names up to 14 characters fit, and ten or eleven letters still read well at the default width.
There are seven fonts to choose from:
- Outfit Bold, the default: round, friendly and the best for long names because it keeps the letters largest.
- Pacifico, Lobster and Dancing Script for a script look that suits the rainbow and crown. Scripts need a little more room.
- Big Shoulders Bold, a condensed font that fits a long name at a good height, and Liberation Sans Bold for a plain look.
- Noto Sans Devanagari Bold for names written in Hindi or Marathi.
For a name like ALEXANDRA or CHRISTOPHER, preview it with the font the buyer wants before quoting. If the name looks small, widen the plaque to 220 or 240 mm or switch to Outfit Bold or Big Shoulders.
Colours that work
Three colours are stacked: the picture, then the details and the name outline, then the name. Strong contrast between the outline and the name matters most, because that is what is read from the hallway.
- Rocket: white body, red details, navy name.
- Dinosaur: green body, orange details, white name.
- Rainbow: white, pink and purple for a soft nursery.
- Whale: blue body, white belly and spout drops, navy name.
Ask whether the room has a colour scheme. Parents decorating a nursery often have one, and a plaque that matches it looks planned rather than added.
Hanging: hidden keyholes, screws or tape
- Hidden keyholes, the default. Two keyhole slots in the back slip over two screw heads. Fix the screws into the door with heads under 9 mm across, leave them about 3 mm proud, hook the plaque on and let it drop. Nothing shows from the front. Keyholes need the picture to be at least 5 mm thick, which is the default.
- Screw holes: two countersunk holes through the front, sized for 3 to 5 mm screws. They sit in the picture away from the name, such as the rocket's porthole or the castle's tower doors, so the screw heads look like part of the drawing.
- None: a flat back for double-sided mounting tape. This is the one for rented flats and for doors parents do not want to drill.
Include the screws or tape if you can; many gift buyers do not own a drill.
Printing three colours
The plaque prints flat, back down, with no supports. The keyhole slots bridge cleanly over the screw-head channel.
On a multi-colour printer, load the three parts and assign a colour to each. On a single-nozzle printer the colours are stacked in layers, so you only need two filament changes: one at the top of the picture (5 mm by default) and one at the top of the outline. Two-colour name prints in Bambu Studio shows how to add a change at a height; add the second the same way.
PLA is fine indoors. Print the picture at 15 to 20% infill to keep it light on the door. If you want a plainer look, set the outline to 0 and the name stands straight on the picture in the text colour.
Matching sets with the name puzzle
The name puzzle spells the child's name in chunky rounded letters that lift out of a board, each fitting only its own pocket. A four-letter name with a star makes a board 220 mm long, and the letters take turns through four bright colours. Print the plaque and puzzle in the same colours and sell them as a nursery set or first-birthday bundle.
For the shelf, add shelf words with the baby's name, in English, Hindi or both. Our guide to personalised name puzzles covers printing and safety for the puzzle. Both sit in the home and keepsakes category alongside the plaque.
Selling on Etsy and Instagram
Photograph it on a real door or a nursery-coloured wall, with one image showing all six themes. Our guide to photographing 3D prints with your phone covers the basics.
On Etsy, list it once with variations for theme and colour set (up to three variation types per listing), and put descriptive phrases in the title and tags: kids door name plaque, personalised door sign, name plate for kids room. Etsy allows 13 tags of up to 20 characters each, and a tag can be a short phrase. See selling personalised 3D prints on Etsy for listings and personalisation boxes.
On Instagram and WhatsApp, each finished order (with the parents' permission) is a new photo to post. Custom orders on Instagram and WhatsApp has a message template for taking the name and theme.
Spelling is the one thing that cannot go wrong on a child's name. Ask for it written, and send a preview before printing. Avoiding misspelled names explains how.
Pricing and lead times
Work out filament, printer time and your time for one plaque, then add margin; how to price personalised 3D prints has the method. Then offer:
- One plaque at your full price.
- A second plaque for a sibling at a lower price, since the colours and set-up are the same.
- A plaque and puzzle set priced below the two bought separately.
- Playschool sets per child, with the names collected as one list. With the Seller plan, paste the list into Bulk order and get one file per child in a ZIP.
A single plaque takes a few hours to print. Quote three to five days to allow for approval of the preview and the post, and more in the weeks before birthdays and festivals.
Common questions
Can it hang without drilling? Yes. Choose no mounting holes and use double-sided mounting tape on a clean, smooth door.
Can I print it in one colour? Yes. Load one filament and skip the colour changes. The raised outline and name still show in the light, but three colours read far better from across a room.
Planning what to make next? Browse personalised print ideas by occasion, or work out prices, party orders and colour changes with the free maker tools.