Maths manipulatives to 3D print for home: a ten frame, a number line with a slider and a clock

Three pieces of classroom maths to keep at the kitchen table, each with the child's name on it: a ten frame with two-colour counters, a number line with a pointer that slides, and a clock with hands to turn. How each one is used, how it prints, and who buys them.

Maths manipulatives to 3D print for home: a ten frame, a number line with a slider and a clock

Manipulatives are the objects children handle before they work with written numbers: counters, blocks, number lines, clock faces. They are usually the first, concrete step in teaching a concept, before pictures and then abstract symbols (Wikipedia). The early years curriculum leans on them. England's national curriculum for maths, for example, asks Year 1 pupils to represent numbers using objects and the number line and to tell the time to the hour and half past, and Year 2 pupils to tell the time to five minutes.

So children come home with homework that uses things the classroom has and the house doesn't: a ten frame, a number line, a clock with hands. All three print flat on a home printer with the child's name on them.

A ten frame with two-colour counters

The ten frame is two rows of five shallow dishes, as it is taught at school, with the child's name or the class's along the top. Ten counters sit in the dishes and stay put.

It shows a number as part of ten. Seven counters fill the top row and two of the bottom, so seven reads as five and two, with three gaps left before ten. Each counter is one colour on one side and another on the other, so turning some over shows a sum in two colours: four red and three yellow.

One frame covers numbers to ten. Choose two frames and it goes to twenty, with thirteen shown as a full frame and three more.

The counters are small parts, about 23 mm across at the standard size, the kind US rules treat as a choking hazard for children under three. A bigger square on the board makes bigger counters.

A number line with a slider

The number line slider runs from nought to ten or nought to twenty, with a mark for each number and longer marks at the fives and tens. A pointer slides along it, for counting on and counting back: put the pointer on six, slide it on three marks counting seven, eight, nine, and it lands on nine. Slide back for take away.

The pointer runs in a channel whose edges lean in over it, and a cap pressed into the end of the channel shuts it in, so it can't be lost. It should slide with one finger and stay where it is left; if it is stiff, raise the clearance and reprint the pointer and cap, which are small.

The line is 180 to 250 mm long, with the child's name at the left. Set the length to your bed and the numbers are spaced to fit. The design page lists one more use: counting sleeps.

A learning clock with hands to turn

The learning clock separates the two scales on a clock face by colour. The hours and the short hand are one colour; the minutes round the outside, in fives, and the long hand are another. Each hand points at numbers of its own colour. An optional ring of 13 to 24 sits inside the hours.

The hands turn on a pin and a press-on cap, firm enough to stay where they are put. It is not a real clock: there is no mechanism, and the hands are turned by hand. It is 140 to 240 mm across and hangs from a hole at the top or lies on the table. The teaching clock post goes through it in more detail.

Printing the set

All three print flat, face up, with no supports and no glue. Colours are stacked layers with a filament change, so a single-spool printer does the job.

  • Ten frame: the board prints face up with a change when the lettering starts. The counters print with a change half way up, so each is two-sided; their top half shares the lettering's colour, so the set needs three colours. Red and yellow are a common pair for two-sided counters.
  • Number line: a change when the numbers start, and the pointer and cap in a bright third colour. Slide the pointer in from the end, then press in the cap.
  • Learning clock: three colours. The face takes two changes, at the hour numbers and at the top of the minute numbers; the hands, pin and cap print separately.

Who buys them

  • Parents of children starting school, with the child's name on each piece.
  • Tutors and teaching assistants, who buy several.
  • Teachers, for a class set with a name on each.

For a class set, paste the names one per line into a bulk order and each file comes back with its own name. Bulk orders and the right to sell the prints come with the Seller plan.

A ten frame and a number line with the same name make a home maths set; add the clock for a third piece. The kids' rooms and learning page has more for the same age, and the name ruler goes in the pencil case beside them.

Planning what to make next? Browse personalised print ideas by occasion, or work out prices, party orders and colour changes with the free maker tools.

Take your next custom order in minutes

Type your customer's text, send them a picture to approve, download a print-ready file.

Start selling

Keep reading