A teaching clock for kids to 3D print: learn the time in three steps

A learning clock for kids with their name on it and hands they turn themselves. The hours and the short hand share one colour, the minutes and the long hand another, so each hand points at its own numbers. How to teach the time with it in three steps, and how it prints.

A teaching clock for kids to 3D print: learn the time in three steps

Telling the time is hard for a child because one clock face is two scales at once. The same 3 means three o'clock for one hand and fifteen minutes for the other.

Schools teach it in stages over several years. England's national curriculum for maths is a clear example: in Year 1 (age 5 to 6) children tell the time to the hour and half past; in Year 2 to five minutes, including quarter past and quarter to; and in Year 3 they read an analogue clock to the nearest minute, with Roman numerals and 12- and 24-hour clocks. Practising at home in the same order, hours first and minutes after, matches what the class is doing.

A learning clock for kids that separates the two scales by colour takes much of the confusion away, and a teaching clock printable at home can carry the child's own name. Here is how to teach the time with it in three steps.

How the clock works

The learning clock has the hours big and in one colour, with a short hand to match. Round the outside, the minutes go in fives in a second colour, with a long hand to match. So the short hand points at the big numbers, and the long hand points at the small numbers round the edge. "Where is the red hand pointing?" has one answer.

The hands turn on a pin that comes through the face from behind, and a cap presses onto the pin's end and holds them snug. They stay where they are put, so a child can set half past three, check it against the kitchen clock and be right. Press the cap further on for stiffer hands.

It isn't a real clock: there is no mechanism. The hands are turned by hand, which is what makes it good for practice.

Teaching the time in three steps

Step one: the hours. Start with the short hand alone. Leave the long hand off, or point it straight up at 12, and set the short hand to each hour: this is three o'clock, this is bedtime at seven. The small version with hours only (turn the minutes off) suits this stage, which is roughly where Year 1 starts.

Step two: the minutes. Put the long hand on. Count round the minute numbers in fives together: 5, 10, 15. Then set a time and read it in two parts: the short hand says the hour, the long hand says the minutes. Half past is the long hand on 30; quarter past is 15.

Step three: matching real clocks. Ask the child to set the time for things in their day, school, lunch, the bath, and then check it against the clock on the wall. Turning on the optional ring of 13 to 24 inside the hours helps when they start to meet times on timetables and phones, which the English curriculum introduces from Year 3.

A teaching clock printable at home

The clock prints in three colours on a single-spool printer, with nothing glued. The face prints flat, face up, on one plate with two filament changes: at the hour numbers, and at the top of the minute numbers. The short hand prints on its own in the hour colour, and the long hand, the pin and the cap together in the minute colour. Print the pin standing on its head, as it comes in the file.

Choose two strong, different colours for the hands on a pale face; red and blue on cream is the classic. The clock is 140 to 240 mm across and hangs from a hole at the top or lies on the table.

To put it together, push the pin through the face from the back, where its head sits in a recess. Drop the short hand on, then the long hand, then press the cap on. If the cap is loose or won't go on, change Fit in All options and reprint the cap. The pin and cap are small parts, so keep a clock with younger siblings under three in mind: US rules treat small parts in products for that age as a choking hazard (16 CFR 1501).

Other things to learn on

The clock is one of three starting-school toys. The name tracing board has the child's name as grooves to trace with a finger, and the lacing shoe card is for learning to tie laces. Our post on starting-school toys to 3D print covers all three. For routines, the slider chore chart can list the morning in order, so the clock and the chart work together: dressed by half past seven.

For teachers and sellers

On the Seller plan you can sell the clocks you print. A clock with a name, in the child's two favourite colours, suits a birthday or the start of school. For a classroom, a set for a table group usually goes without names; the teachers and schools page has more for classrooms.

Planning what to make next? Browse personalised print ideas by occasion, or work out prices, party orders and colour changes with the free maker tools.

Take your next custom order in minutes

Type your customer's text, send them a picture to approve, download a print-ready file.

Start selling

Keep reading