Digital 3D print fileDownloads as STL3MF
Name tracing board for learning to write
A board for learning to write your own name: the letters are grooves cut through the top layer to a second colour, wide enough for a finger or the little stylus that prints beside it. Traced again and again until the hand knows the shapes.
- Clad 2 colours, 1 filament swapColours stacked in layers, like a clad coin: pause and swap filament where each colour starts. No AMS needed.
- One Strike 2 pieces, each ready to useComes off the plate ready to use, with nothing to put together.
What you download
name-tracing-board-Emma.stlFor any slicer and any 3D printername-tracing-board-Emma.3mfA Bambu Studio project with the colours set
Digital files only. Nothing is posted: you print it yourself, for you or for your customers.
Single files and the Party pass and Season pass are for personal use and gifts. To sell prints you need an active Seller plan or Seller year pass; prints made while it is active stay yours to sell after it ends. The digital files themselves may never be shared or sold. Read the licence
- Size
- About 214 × 93 × 4 mm (21.4 × 9.3 cm) with the example text
- You type
- Name, Small words, Corners, Letter height, plus 4 more options for fine-tuning
- Colours
- 2 parts (base, top), so it prints in 2 colours or as one
- Files
- STL for any slicer, plus a two-colour Bambu Studio project
Why sellers like it
- The name's letters as grooves, in a second colour
- Wide enough for a finger; a stylus prints beside the board
- Type it as it is written at school: a capital, then small letters
- Letters up to 70 mm tall; a long name gets smaller letters to fit the bed
- Stars, hearts, or a sun and a cloud in the corners; a line of small words
- Names in English or Hindi
The first word anyone learns to write
A child's own name is the first thing they want to write, and the hardest: the letters are whichever ones they happened to be given. Tracing them in a groove, with a finger and then a stylus, builds the movement before the pencil gets involved.
Made from the name
There is no alphabet to buy and no letters to arrange. Type the name and the board is cut for it, in the colours the child likes.
Printing tips
- Print face up; change filament when the top layer starts.
- Strong contrast helps: a bright top over a dark or a yellow base.
- Check the first layers of the top colour: small islands inside letters like a and e should be stuck down well.
Selling tips
Offer it with the name puzzle for younger children and the learning clock for older ones. Nurseries want the whole intake: quote per child.
Questions about the name tracing board
How is it used?
The child runs a finger, and later the stylus, along the groove of each letter, saying its name or its sound. Show them where each letter starts and which way it goes the first few times. A few minutes a day is plenty.
Why grooves and not raised letters?
A groove guides the finger and keeps it on the letter's path, which a raised letter can't do. It is the same idea as tracing in a tray of sand, without the sand.
Capitals or small letters?
Type the name the way the school writes it, usually a capital first letter and the rest small. The board cuts exactly what you type.
How big are the letters?
Up to the height you choose, 46 mm by default. The board is at most 246 mm wide, so a long name gets shorter letters: Emma is 46 mm tall, Maximilian a little over 30 mm. For very long names, use the stylus, or make a board for each half of the name.
How does it print?
Flat, face up, in two colours: the board first, then the top layer with the letters left open. That is one filament change, and the groove is as deep as the top layer, 1.6 mm.
Can I sell it?
Yes, on the Seller plan. Nurseries order one per child from the register; parents buy one before the first term.
Ideas for selling it
More in personalised print ideas by occasion. Pricing an order? Try the profit calculator and the other free maker tools.
Sellers also offer
Start selling the name tracing board
Type your customer's text, send them the picture, download the print file.
Early Black Fridaythrough Nov 30 (US Pacific time)
The Seller plan at $12 $6 a month
For your first 3 months, then $12. Every design, bulk lists, and the right to sell your prints. Comes off at checkout, no code needed.