Maths manipulatives to 3D print for home and classroom: fraction circles, a geoboard and a ten frame

Three pieces of classroom maths that print flat with a name on them: fraction circles cut into halves, thirds, quarters, sixths and eighths, a geoboard with pegs for rubber bands, and a ten frame with two-colour counters. What each one teaches, how it prints, and who buys them.

Maths manipulatives to 3D print for home and classroom: fraction circles, a geoboard and a ten frame

Some maths only makes sense in the hand: two quarters laid on a half, a band stretched round four pegs into a square. These are maths manipulatives, physical objects children move about to see an idea before they write it down.

The national curriculum in England builds them in from the start. Key stage 1 teaching should involve practical resources, for example concrete objects and measuring tools, and by year 2 pupils should be able to recognise, find, name and write 1/3, 1/4, 2/4 and 3/4 of a shape or a set, and see that 2/4 is the same as 1/2. That is exactly what fraction circles show. The geoboard is older than most people expect: it was invented and popularised in the 1950s by the mathematician Caleb Gattegno, originally in plywood and brass nails.

Here are three that print flat with the owner's name on each one.

Fraction circles you can lay on top of each other

The fraction circles are six circles of the same size. In the standard set: a whole, two halves, three thirds, four quarters, six sixths and eight eighths, twenty-four pieces in all. Every piece is marked with what it is, 1/2, 1/3, 1/4, and the child's or the teacher's name goes on the whole circle.

Two quarters laid on a half are the same; so are three sixths. A half, a third and a sixth together make a whole, and the child wants to know why.

Two other sets swap the eighths for twelfths, or use halves, quarters, fifths, eighths and tenths. The circles are 60 to 76 mm across.

One honest detail: each piece is a little smaller than its true share, so the pieces print apart on the plate and sit side by side easily. Two quarters laid on a half match it to within about a millimetre.

The smallest pieces, the eighths and twelfths, are small parts and not suitable for children under three, who are most at risk of choking on small objects.

A geoboard 3D print with a name on the rim

The geoboard is a square board with a grid of pegs, three to eleven each way, and the owner's name along the bottom edge. Ordinary rubber bands stretch round the pegs into triangles, squares, stars and letters. The pegs have a small head so the bands stay on, and they print in the second colour so they stand out.

Five pegs each way suits a four to six year old making patterns. Seven or nine is for area, perimeter and angle work. Peg spacing runs from 16 to 30 mm.

The pegs are 4.6 mm thick and print as part of the board. They hold ordinary bands stretched across a few pegs, but a band pulled hard across the whole board can break one. PETG pegs bend further before they give.

Rubber bands are not included, since this is a file you print. They are a choking hazard for children under three and can snap back, so use the board with an adult until the child handles bands sensibly.

A ten frame with two-colour counters

The ten frame is two rows of five shallow dishes with ten counters, each one colour on one side and another on the other. Seven fills the top row and two of the bottom, so a child sees seven as five and two, with three gaps to ten. The earlier post on maths manipulatives for home covers it in detail, with a number line and a clock. The counters are small parts, about 23 mm across at the standard size, and not for children under three.

For the next step up, the hundred square board rings every multiple of the number you choose, and the number line slider has a pointer for counting on and back.

Printing them

All of these print flat, face up, with no supports. Colours are stacked layers with a filament change, so a single-spool printer is enough.

  • Fraction circles: all the pieces on one plate, with a change when the marks start. The marks on the smallest pieces are fine, so use a 0.4 mm nozzle and a 0.2 mm layer. For a colour to each fraction, print the plate once in each colour and pick the halves from one print, the thirds from another; the spare pieces make a second set.
  • Geoboard: one piece, with a change when the pegs start. The peg heads widen gently and need no supports. Slow the print for the pegs so each one cools before the next layer.
  • Ten frame: the board changes colour at the lettering, the counters half way up.

Who they are for

  • Parents and homeschool families, with the child's name.
  • Tutors, who may want several.
  • Teachers, a class set with a name on each, or "ROOM 4" on every set.

For a class, paste the names one per line into a bulk order and each file comes back with its own name. Bulk orders and the right to sell the prints come with the Seller plan. Sell a geoboard with a bag of coloured bands, and offer teachers fraction circles alongside a ten frame. The teachers and schools page has more for the classroom.

Planning what to make next? Browse personalised print ideas by occasion, or work out prices, party orders and colour changes with the free maker tools.

Take your next custom order in minutes

Type your customer's text, send them a picture to approve, download a print-ready file.

Start selling

Keep reading