Personalised sewing gifts to 3D print: a maker's set with their name on it

Three small things for someone who sews or knits, each with their name: a tape measure winder, a sheet of handmade tags and a needle gauge. What each one does, how to print them, and how to sell them as a set.

Personalised sewing gifts to 3D print: a maker's set with their name on it

Personalised sewing gifts are hard to buy for someone who already has a full sewing box. The fabric and the patterns are their own choice, and the tools they have are the ones they like. What they rarely have is the small kit with their own name on it. ## What to know first

  • Needle sizes are confusing, so millimetres win. The Craft Yarn Council, which publishes the US yarn industry's standards, notes that letter and number sizing for hooks and needles varies from company to company, and advises relying on the millimetre size, always checking with a gauge swatch. That's why a knitter with old needles whose markings have worn off needs a gauge.
  • Gauge is measured over 4 inches (10 cm). The Council's yarn weight standards give knitting gauge as stitches per 4 inches, so a swatch window that size is the useful one.
  • Anything that goes in the wash needs the right plastic. Prusa describes PLA as a material for parts that don't need high temperature resistance, so it can soften in a hot wash or a tumble dryer. PETG copes better with warmth and water.

These are gifts for someone who sews, knits or crochets: a tape measure winder, a sheet of handmade tags and a needle gauge, each made with a name and printed flat at home.

A tape measure winder

A loose tape measure tangles with everything else in a sewing box. The tape measure winder keeps it flat. The tape's metal tip tucks into a slot, the tape winds end over end between two horns, and the last few centimetres tuck under the turn before.

The name runs along one side and a second line along the other, with scissors, a heart or a star at the top of each side. The tape winds down the middle, so the words stay clear. Set the width to the tape: many sewing tapes are 15 to 20 mm, and the winder takes tapes from 10 to 32 mm. It also winds ribbon, lace and bias binding.

A short name comes out biggest. The name on it also brings the tape back when it is lent.

Handmade tags

Hours go into a hat or a quilt, and then it leaves the house with nothing to say who made it. Handmade tags are small sew-on labels: a small line such as "handmade by" and a big one with the name, with a heart, a ball of yarn, a needle or a star beside it.

They come as a bar with a hole at each end, a round button or a heart, 1 mm thin so they sew on flat. One print makes a whole sheet, twelve by default and up to forty the same. They sew on with a few stitches through the holes, like a button.

Print them in PETG for anything that will be washed: they take a normal warm wash and line drying. PLA softens in a hot wash or a tumble dryer. On anything for a baby or a small child, sew the tag on firmly and put it where it can't be chewed, or leave it off. Sew-on labels for handmade items goes into the tags in more detail.

A needle gauge

Many knitters have a jar of needles with the numbers worn off. The needle gauge has eighteen holes from 2 to 10 mm, each marked with its size, and US sizes as well if wanted. A ruler runs along the top in centimetres or inches, and a 10 cm (or 4 inch) window counts the stitches and rows in a swatch. It works for crochet hooks too: measure the shaft, not the head.

The name goes across it, a knitter's own or a yarn shop's. It is 160 by 60 mm and fits a project bag's pocket.

Printed holes come out a little small, so each hole is made 0.15 mm bigger than its size. Check the 4 mm hole with a 4 mm needle you are sure of before printing a batch.

Printing the set

All three print flat, face up, with no supports. Each needs one filament change where the words start; the colours are stacked layers, so no multi-colour printer is needed. Print them in the same two colours so they read as a set. Cream with brown looks like boxwood on the gauge, and kraft brown with cream suits tags on wool.

A name in script works on the winder: one example has Olivia in Pacifico with a heart.

Selling personalised sewing gifts as a set

The set suits craft fairs, with a name to order, and works before Christmas as a stocking filler for the sewist or knitter in the family. Sell the winder with a tape wound on, next to a sheet of tags and a gauge with the same name.

There are trade orders to look for too. A yarn shop could put its own name on gauges, to sell or give with a purchase, and sell tag sheets at the till. A boutique can put its name on one side of a winder and its phone number on the other, and tailors and sewing schools may want winders in tens. A knitting group might want one gauge per member. For a list of members, paste the names one per line into a bulk order. Bulk orders and the right to sell come with the Seller plan.

Selling at craft fairs and markets covers running the stall itself.

Planning what to make next? Browse personalised print ideas by occasion, or work out prices, party orders and colour changes with the free maker tools.

Take your next custom order in minutes

Type your customer's text, send them a picture to approve, download a print-ready file.

Start selling

Keep reading