Swear jar and savings jar lids to 3D print: a slotted lid with the family's name
A savings jar lid with a slot that fits a mason jar's own screw band, with SWEAR JAR, HOLIDAY or a child's name on it. Three new year jars for a family, how to size the slot, and printed reward coins for the pocket money jar.
New year is when a lot of people set rules for themselves. In the US, roughly 40 to 50 per cent of adults have made New Year's resolutions, according to polls going back to the 1980s, and families make house rules too: less swearing, save for the summer, earn the pocket money. A jar on the kitchen shelf makes a rule visible. The usual jar is a mason jar, a home canning jar whose two-piece closure is a flat metal disc held down by a separate screw band. Swap the disc for one with a slot and the jar becomes a money box that still opens for counting.
A swear jar lid or a savings jar lid with a slot is a small print that turns any mason jar into one, with the family's name round the edge.
What the lid is
The jar lid is a flat disc that drops into a mason jar's screw band in place of the metal lid. It has a slot for coins and folded notes, a big word over the slot, a line under it, and a name running round the bottom edge. The band screws down over it as usual, and screws off when it is time to count.
It is sized for regular mouth (70 mm lid) and wide mouth (86 mm lid) jars. For any other jar with a two-piece lid, measure the metal disc that came with it and enter its diameter, from 50 to 120 mm. It needs the band to hold it, so jars with a one-piece screw lid won't do; mason jars and other preserving jars made for home canning use the two-piece kind.
The disc is 1.2 mm thick by default, which the band takes. If yours is tight, print it at 1 mm; if there is room, 1.6 mm is stiffer.
Three jars for the new year
The swear jar. SWEAR JAR as the big word, $1 A WORD under the slot, and THE JOHNSONS round the edge. Put it somewhere everyone walks past. The fine is written on it, so there is no arguing about the rate.
The holiday fund. HOLIDAY over the slot, the place and the year under it, the family's name round the edge. Spare change goes in through the year, and the band comes off when it is time to book.
The pocket money jar. The child's name round the edge and SAVINGS over the slot, for a jar of their own. A clear jar lets them watch it fill, which is half the point.
The same lid also makes an honesty box for eggs at the gate, or a ballot jar.
Sizing the slot
The slot can be 26 to 50 mm long and 3 to 8 mm wide. Make it longer than the largest coin you will post is wide, and about 5 mm across for a folded note. The standard slot is 34 mm long; measure your largest coin and a note as you fold it, and lengthen the slot if they need more.
The slot stops a hand going in. For a swear jar in a house with teenagers, that matters.
Reward coins for the pocket money jar
For younger children, real money is not always the right thing to save. Reward coins are a family's own money: coins with the child's name round the top, a line of your own round the bottom and a big number in the middle, with a star, a heart, a crown or a smile under it. A sheet can be all one value or a mix, such as ones, fives and tens, with up to forty coins on it, each 26 to 60 mm across. They are thick enough to pick up and to clink in a jar. Keep them away from children under three, as with any small loose pieces; the US small parts rule applies to toys for that age.
Children earn them for jobs and kind acts and spend them on whatever the family agrees: ten minutes of screen time, choosing the film, a later bedtime. A coin can't be added with a felt pen.
To post them through the lid, make the slot longer than the coins are across and wider than they are thick. Default coins are 36 mm across and 2.6 mm thick, so a 40 mm slot takes them. A slider chore chart on the wall says which jobs earn a coin; the post on the chore chart with sliders covers setting one up.
Printing them
The lid and the coins print flat, face up, with no supports. The words stand out in a second colour stacked on top, so one filament change gives two colours on a single-colour printer. Print the disc in one colour and the words in a bright one. Use PETG for coins that live in pockets.
Selling them
Jars suit January and the stocking: a lid with a family's name, sold with or without the jar and band, and a sheet of coins with a child's name. Selling them needs the Seller plan. The kids' rooms and learning page has more for the same families.
Planning what to make next? Browse personalised print ideas by occasion, or work out prices, party orders and colour changes with the free maker tools.