Switch board labels for the home: 3D printed strips and tabs that name every switch

Switch board labels that outlast stickers: a printed strip with a picture over each word, or one tab per switch. How to measure the board, choose the words, print thin parts and sell house sets.

Switch board labels for the home: 3D printed strips and tabs that name every switch

Many Indian flats have modular switchboards with a row of identical white switches, often six or eight to a board. The electrician knows which one is the geyser. Everyone else flicks them all until the right thing comes on. Guests turn on the exhaust looking for the light, and the night lamp is always the last one tried. Switch board labels end the guessing.

Paper stickers are the usual fix, but paper and thin vinyl can lift at the corners in a damp bathroom or a greasy kitchen. A printed label is raised, two-coloured and wipes clean. Before choosing one, three things matter: the switch pitch, the space above the switches, and the material for the room. The sections below cover each.

Two kinds of switch board labels

A strip across the board. The switch label is one thin strip that sticks above the whole row. Each name sits right over its switch, with a small picture above it, and short dividers line up with the gaps between switches. It covers 1 to 8 switches and looks fitted, like part of the board.

One tab per switch. The switch tab is a small tab with a picture and a word. Put them only where they help, and replace one when a switch gets rewired. Type the whole board as a list and every tab prints on one plate at the same text size.

A new flat with matching modular boards suits the strip; an older house with mixed or spaced-out boards suits the tabs.

Measure the switch pitch first

  1. Measure from the middle of the first switch to the middle of the last.
  2. Divide by one less than the number of switches.

That is the pitch. Brands and module sizes differ, so always measure; the design starts at 22.5 mm. The design takes 15 to 40 mm. The strip is the number of switches times the pitch long: six at 22.5 mm is 135 mm.

Also check the clear space above the switches. The strip is 15 mm tall by default (10 to 26 mm). On a board with a narrow frame, drop it to 11 or 12 mm.

For tabs, the rounded square and the flag are 22 by 16 mm, about one module wide, so a row of them sits side by side over a row of switches. The flag's point adds about 4 mm. The pill is 33 by 12 mm, so keep it for a lone switch or a widely spaced board.

Choosing the words

Ask the customer to name each switch from left to right, then keep the words short:

  • FAN, LIGHT, GEYSER, AC, TV, PLUG cover most rooms.
  • NIGHT LAMP, TUBE LIGHT, EXHAUST, BELL, MOTOR, INVERTER, BALCONY fill in the rest.
  • Two fans or two lights on one board: FAN 1, FAN 2, or by place, BED LIGHT, MAIN LIGHT.
  • WASH rather than WASHING MACHINE, HALL rather than HALL LIGHT.

The picture comes from the word. On the strip, FAN gets a fan, LIGHT a bulb, GEYSER a flame, AC a snowflake, NIGHT LAMP a moon, MOTOR a water drop and BELL a bell; appliances such as FRIDGE get a plug. On the tabs there are 15 pictures, including a tube light, an exhaust fan, a water pump, an inverter, a fridge and a washing machine. You can choose a picture yourself: on the strip, list one per switch in the icons box (for example fan,bulb,none,plug); on the tabs, add it after a colon, like PORCH:outside.

A switch that needs no name gets a gap in the list, like FAN,,LIGHT, and the strip's dividers still line up with the board.

Hindi labels

Both designs offer Noto Sans Devanagari Bold, so पंखा, बत्ती or गीज़र work as well as English. The automatic pictures match English words, so with Hindi pick the pictures yourself: fan,bulb,geyser in the strip's icons box, or पंखा:fan, गीज़र:geyser in the tab set. Matras and joined letters can look different from handwriting, so send a picture and get a clear yes before printing.

How to print thin parts cleanly

Both designs print flat, face up, in two colours, with no supports.

  • Thin layers. The strip is 1.2 mm thick with 0.6 mm raised lettering, and the pictures are about 6 mm tall. Print at 0.12 or 0.16 mm layers so the fan blades and the snowflake come out crisp.
  • One colour change. Change filament where the lettering starts: 1.2 mm on the strip, the top of the 1.6 mm tab. The 3MF download keeps the base and the lettering as separate parts. See two-colour name prints in Bambu Studio if you have not done this before.
  • Long strips. An eight-switch strip is 180 mm. If that is longer than your bed, turn it corner to corner.

For colours, white lettering on a dark grey strip has the most contrast, and dark grey on white blends in with a white board. PLA is fine in most rooms, but Prusa notes it softens and deforms above about 60 °C. For a bathroom geyser switch or a kitchen near the hob, PETG is the safer choice: Prusa lists it as water and humidity resistant and suited to temperatures below 80 °C.

Sticking them on with double-sided tape

The backs are flat. Use thin double-sided foam tape, or clear double-sided tape for a flatter look. Wipe the switch plate with a little rubbing alcohol or spirit first, especially in kitchens where there is a film of oil, and press firmly for a few seconds. Foam tape can usually be peeled off when tenants move out. Put the tape in the packet.

Who buys switch labels for home

  • New flat owners. They move into a house full of unfamiliar boards.
  • Electricians. They know the wiring and are standing at the board anyway. Labelled boards at handover make the job look thorough.
  • Interior designers and builders. Labels in the flat's colours finish a handover, and a builder with several flats needs a set for each.
  • Rental flats and PGs. Landlords and PG owners want tenants to stop calling about the geyser. Every room gets the same set.
  • Homestays and guest houses. Labelled switches save a late-night phone call. The hotels and guest houses page has more for these buyers, and key tags for hotels and Airbnbs suits the same customer.

As a housewarming gift

A set of labels for every board in a new home is a practical housewarming gift, and an unusual one. It pairs well with a door plate: a flat number plate or a layered house number in the same colours. If you sell to a housing society, our post on flat number plates for housing societies covers that side of the order.

Taking and pricing a house order

Sell by the house, not by the label. Customers do not know how many switches they have, so ask for:

  1. A photo of every board, straight on, with the room written under it.
  2. The names, left to right, typed out per board.
  3. The pitch, or a photo with a tape measure across the switches.
  4. Colours, and English or Hindi.

Quote a price per board with a set price for a whole flat (for example a 2BHK with a fixed number of boards), and a small extra for each board past that. Our guide to pricing personalised 3D prints explains how to work out the per-piece price. Send a picture of each board's label before printing; one wrong word is a reprint.

With the Seller plan, put one board per line in a Bulk order and you get a ZIP with one file per board, ready for the printer. With tabs, each board's set is already one file on one plate.

For lead times, the prints themselves are short, so the wait is collecting the names. Promise a few days from approval for a single flat, and agree dates in writing for a builder or designer with several flats.

Common questions

Are printed labels better than switchboard stickers? They are thicker, can be wiped clean and have raised pictures. Stickers are cheaper and quicker to put on.

Do they work on offices too? Yes. A meeting room or a shop counter has the same problem, and the offices and coworking page has more pieces to sell alongside.

Planning what to make next? Browse personalised print ideas by occasion, or work out prices, party orders and colour changes with the free maker tools.

Take your next custom order in minutes

Type your customer's text, send them a picture to approve, download a print-ready file.

Start selling

Keep reading