Digital 3D print fileDownloads as STL3MF
Switchboard label strip for a row of switches
A thin strip that sticks above the switches and names each one, with a small picture over every word, spaced to match the board.
- Clad 2 colours, 1 filament swapColours stacked in layers, like a clad coin: pause and swap filament where each colour starts. No AMS needed.
- One Strike One pieceComes off the plate ready to use, with nothing to put together.
What you download
switch-label-FANLIGHTGEYSERACTVPLUG.stlFor any slicer and any 3D printerswitch-label-FANLIGHTGEYSERACTVPLUG.3mfA Bambu Studio project with the colours set
Digital files only. Nothing is posted: you print it yourself, for you or for your customers.
Single files and the Party pass and Season pass are for personal use and gifts. To sell prints you need an active Seller plan or Seller year pass; prints made while it is active stay yours to sell after it ends. The digital files themselves may never be shared or sold. Read the licence
- Size
- About 135 × 15 × 2 mm (13.5 × 1.5 cm) with the example text
- You type
- Switch names, Switches, Switch spacing, plus 11 more options for fine-tuning
- Colours
- 2 parts (base, text), so it prints in 2 colours or as one
- Files
- STL for any slicer, plus a two-colour Bambu Studio project
Why sellers like it
- One name per switch, typed as a list: FAN, LIGHT, GEYSER, AC, TV, PLUG
- A small picture over each word: fan, bulb, flame, snowflake, TV, plug, moon, door, balcony, bell
- Spaced at the board's module pitch, 22.5 mm to start, for 1 to 8 switches
- Two-word names like NIGHT LAMP go on two lines on their own
- 1.2 mm thick with raised lettering, two colours, no supports
Which one is the fan?
Indian homes have modular switchboards with six or eight identical rocker switches in a row, and nobody but the electrician remembers which is which. Guests flick the geyser on looking for the light, and the night lamp is always the last one tried. A strip over the switches settles it.
Type the names left to right, one per switch. Each word sits right over its switch, at the board's own spacing, with a small picture over it so it reads at a glance before the word does. Short dividers between the names line up with the gaps between the switches. A name of two words drops onto two lines when that keeps it bigger.
Printing tips
- Print face up at 0.12 or 0.16 mm layers: the pictures are about 6 mm tall and come out cleaner with thin layers.
- Change filament at 1.2 mm, where the lettering starts. White on a dark strip, or dark grey on a white strip to match a white board.
- A strip longer than your bed's width can be printed corner to corner; an eight-switch strip is 180 mm.
Selling tips
Sell it as a house set: measure one board, then make one strip per room. New flat owners, landlords getting a flat ready for tenants and guest houses buy these in batches. A spare set of the most common words (FAN, LIGHT, PLUG) sells well too.
Questions about the switch label
How do I get the spacing right for my board?
Measure from the middle of the first switch to the middle of the last, and divide by one less than the number of switches. That is the pitch. Most Indian modular boards come out between 22 and 24 mm.
How do the pictures get picked?
From the name: FAN gets a fan, LIGHT or TUBE LIGHT a bulb, GEYSER a flame, AC a snowflake, NIGHT LAMP a moon, MOTOR a water drop, BELL a bell, and appliances like FRIDGE or WASHING MACHINE a plug. To choose them yourself, list one per switch in icons, for example fan,bulb,none,plug.
What if a switch doesn't need a name?
Leave a gap in the list, like FAN,,LIGHT. That switch gets a blank space, and the dividers still line up with the board.
How do I stick it on?
Thin double-sided foam tape or a strip of clear double-sided tape on the back. Clean the plate with a little alcohol first so it holds.
How do I do the whole house?
On the Seller plan, put one board per line in a bulk order: the bedroom, the hall, the kitchen. You get a ZIP with one strip per board.
Ideas for selling it
More in personalised print ideas by occasion. Pricing an order? Try the profit calculator and the other free maker tools.
Sellers also offer
Start selling the switch label
Type your customer's text, send them the picture, download the print file.
Early Black Fridaythrough Nov 30 (US Pacific time)
The Seller plan at $12 $6 a month
For your first 3 months, then $12. Every design, bulk lists, and the right to sell your prints. Comes off at checkout, no code needed.