Tip jar ideas for cafés and stalls: a proper lid, your name and a this-or-that vote
Three tip jar ideas you can 3D print: a slotted lid with the café's name for a mason jar, a sign that turns two jars into a vote, and a bill clip that says thank you at the table. What each one does, and question ideas for the vote through the year.
How much people tip at a counter depends a lot on local custom, which varies widely from country to country, and on whether there is anything to tip into at all. A tip jar should be easy to see, clearly labelled and hard to dip into: a narrow slot keeps hands out, and a lid that unscrews makes emptying it at closing time simple.
There's also the question of whose tips they are. In England, Scotland and Wales, the statutory code of practice on distributing tips explains when an employer counts as controlling cash tips (for example by collecting them and sharing them out at the end of a shift) and so must pass them on to workers fairly and transparently. Owners and staff should agree how the jar is shared before it goes on the counter.
Most tip jars are a jam jar with a paper label taped on. The ideas below are small printed pieces that make the jar look like it belongs on the counter, and in one case give people something to tip for: a lid with your name, a vote between two jars, and a clip that brings the bill. None of them promise a number; what they do is give a customer a reason to drop the change in.
A lid that makes the jar look meant
The tip jar lid is a flat disc that drops into a mason jar's own screw band in place of the metal lid. It has a slot for coins and folded notes, a big word over the slot (TIPS by default), a line under it such as THANK YOU, and your name running round the bottom edge.
It comes sized for regular mouth (70 mm lid) and wide mouth (86 mm lid) jars, or you can enter the diameter of any other two-piece lid between 50 and 120 mm. The slot can be 26 to 50 mm long and 3 to 8 mm wide; make it longer than your largest coin is wide and about 5 mm across for a folded note. The slot keeps hands out and notes in, and the band unscrews at closing time.
A named jar looks like part of the counter, not a generic pot by the till. A script font with MAKE OUR DAY under the slot suits a bakery.
Tip jar voting: two jars and a question
The idea that gets people talking is the vote. The tip battle sign is a low board that stands in front of two jars with a question along the top and an answer at each end, each with an arrow up to its jar. Customers tip to back their side.
The board is 150 to 250 mm wide and 56 to 90 mm tall, low enough that the jars and the coins in them show over the top. It leans back on two slot-on feet, with no glue. The question takes up to 22 letters and each answer up to 10, so keep it short enough to read from the queue.
This is where funny tip jar signs earn their place. A plain TIPS jar asks for money. A jar marked DOGS next to one marked CATS asks for an opinion instead, and regulars can see which side is ahead.
Question ideas through the year
The best questions are ones people answer without thinking. Swap the board when the season changes and keep the same feet; boards of the same thickness swap in seconds.
- All year: cats or dogs, tea or coffee, PINEAPPLE ON PIZZA? with YES and NEVER.
- Winter: mince pies or yule log, cream or mallows on the hot chocolate.
- Spring: eggs or bunnies.
- Summer: beach or pool, ice lolly or cone.
- Autumn: spiced or plain latte, trick or treat.
- Any weekend: the two local teams playing, or two films everyone has seen.
Pair the sign with two tip jar lids that carry the two answers in place of TIPS, and the whole thing reads as one set.
The bill clip: thank you at the table
For table service, the tip is decided when the bill arrives. The bill clip carries the café's or restaurant's name over a line such as THANK YOU or SEE YOU SOON, with a heart, a star, a cup or a leaf on the tongue. The tongue is cut free on three sides, so the bill slides up behind it and is held flat with your name above it. Print it in PETG, which Prusa's PETG guide describes as more flexible than PLA, so the tongue bends further before it breaks.
Printing them
All three print flat, face up, with no supports. The words are a second colour stacked on top of the base, so one filament change gives you two colours on a single-colour printer. A dark base with bright words reads best from across a counter.
Selling them to cafés
These go together as a set for the cafés, food trucks and stalls near you: a lid, a battle sign and a run of bill clips in the café's own colours. Take one along with their name already on it. Offer a new question board each month and you have a reason to go back. Selling them needs the Seller plan, and the cafés and restaurants page has more counter pieces, from menu card holders to order numbers. For the rest of the counter, see 3D printed signs and tools for cafés.
Planning what to make next? Browse personalised print ideas by occasion, or work out prices, party orders and colour changes with the free maker tools.