Digital 3D print fileDownloads as STL3MF
Balloon weight with the age and the name
A weight for a bunch of helium balloons with the age big in the middle and the name under it. Coins or washers go into pockets at a pause and are sealed in. The ribbons tie through a tab on top, and a notch beside it pinches them to set the height. A flower, circle, heart or star.
- Clad 2 colours, 1 filament swapColours stacked in layers, like a clad coin: pause and swap filament where each colour starts. No AMS needed.
- One Strike One pieceComes off the plate ready to use, with nothing to put together.
What you download
balloon-weight-5.stlFor any slicer and any 3D printerballoon-weight-5.3mfA Bambu Studio project with the colours set
Digital files only. Nothing is posted: you print it yourself, for you or for your customers.
Single files and the Party pass and Season pass are for personal use and gifts. To sell prints you need an active Seller plan or Seller year pass; prints made while it is active stay yours to sell after it ends. The digital files themselves may never be shared or sold. Read the licence
- Size
- About 100 × 113 × 12 mm (10.0 × 11.3 cm) with the example text
- You type
- Age, Name, Shape, Coin pockets, plus 6 more options for fine-tuning
- Colours
- 2 parts (base, text), so it prints in 2 colours or as one
- Files
- STL for any slicer, plus a two-colour Bambu Studio project
Why sellers like it
- The age, a year or an initial big in the middle, the name or HAPPY BIRTHDAY under it
- One, three or four pockets inside; the printer pauses, you drop in coins, washers or nuts, and it prints the lid over them
- Or no pockets, printed solid
- A tab on top with a slot to tie the ribbons through, and a notch that pinches them, so the height changes without untying
- A flower, a circle, a heart or a star, 100 mm across by default (70 to 140 mm)
- Two colours and one pause; no supports, no AMS
A weight that is part of the decoration
Helium balloons need a weight, and it is usually a foil-wrapped lump or a bag of sand under the table. This one sits on the table and says who the party is for: the age big in the middle, the name underneath, in the party's colours.
It is thick, with pockets inside. When the printer reaches the top of the pockets it pauses; drop in coins, washers or nuts and press resume, and it prints the lid over them. The weight is sealed in, so nothing rattles or falls out, and the piece stays heavy at every party after.
Shapes
- Flower: eight round petals, for children's birthdays.
- Circle: plain and roomy, good for a year such as 2027.
- Heart: for 18ths, anniversaries and Valentine's.
- Star: for first birthdays and New Year's Eve.
Ribbons
A tab on top has a slot for the ribbons: thread them through and tie them round the bar. A notch beside the slot narrows to a pinch, so you can pull a ribbon into it to set the balloon's height without untying it.
Printing tips
- Print face up. The pause comes first, at the pockets' top; then change filament where the lettering starts.
- Use at least three walls so the pockets have solid sides.
- The lid bridges over the pockets; print it with your normal bridge settings and the coins sit just below it.
Selling tips
Sell it in a birthday set with name bunting and an arched cake topper with the same name. For milestone birthdays add party glasses with the same number. Shops buy them for opening days with the shop's name and a star.
Questions about the balloon weight
How do the weights go in?
The pockets are open until the printer reaches their top. The Bambu 3MF pauses there by itself (about 9.6 mm up with the default pockets); with an STL, add a pause at that height in your slicer. Drop the coins, washers or nuts in, level with or below the top, and resume: the next layers print the lid over them.
How heavy is it?
The printed weight is light on its own; the pockets do the work. Three pockets 8 mm deep take about four coins each, so a dozen coins of 6 to 8 g add 70 to 100 g, which holds a small bunch of latex balloons. For a big bunch or a large foil number, use steel washers or nuts, a bigger size and four pockets.
What fits in the pockets?
Anything round and flat up to the pocket's width: coins, washers, nuts. The pockets are 28 mm across by default, wide enough for most coins up to 27 mm; set the width and depth to match what you have.
How do the ribbons attach?
Thread the ribbons through the slot in the tab and tie them round the bar above it. To change the height, wrap the ribbon and pull it into the notch beside the slot, which narrows until it grips.
Can I sell it?
Yes, on the Seller plan. It sells with birthday sets: a cake topper, bunting and a balloon weight with the same name and age.
Ideas for selling it
More in personalised print ideas by occasion. Pricing an order? Try the profit calculator and the other free maker tools.
Sellers also offer
Start selling the balloon weight
Type your customer's text, send them the picture, download the print file.
Early Black Fridaythrough Nov 30 (US Pacific time)
The Seller plan at $12 $6 a month
For your first 3 months, then $12. Every design, bulk lists, and the right to sell your prints. Comes off at checkout, no code needed.