Digital 3D print fileDownloads as STL3MF
Peg rail for carded die-cast cars, with a title
A wall rail for die-cast cars that stay in their packets. Each card hangs by its own slot on a flat peg, as it did in the shop, under a title, and rail joins rail along the wall.
- Clad 2 colours, 1 filament swapColours stacked in layers, like a clad coin: pause and swap filament where each colour starts. No AMS needed.
- One Strike One pieceComes off the plate ready to use, with nothing to put together.
What you download
carded-car-peg-rail-TREASURE-HUNTS.stlFor any slicer and any 3D printercarded-car-peg-rail-TREASURE-HUNTS.3mfA Bambu Studio project with the colours set
Digital files only. Nothing is posted: you print it yourself, for you or for your customers.
Single files and the Party pass and Season pass are for personal use and gifts. To sell prints you need an active Seller plan or Seller year pass; prints made while it is active stay yours to sell after it ends. The digital files themselves may never be shared or sold. Read the licence
- Size
- About 236 × 46 × 18 mm (23.6 × 4.6 cm) with the example text
- You type
- Title, Cards, Peg length, Fixing, Lettering, plus 6 more options for fine-tuning
- Colours
- 2 parts (base, text), so it prints in 2 colours or as one
- Files
- STL for any slicer, plus a two-colour Bambu Studio project
Why sellers like it
- Cards hang by their own slot on a flat peg: nothing clamps or bends the card
- A title along the top, above the cards
- One or two cards a rail; a jigsaw knob joins the next rail for any length
- Pegs lean up 15 degrees so a card can't slide off
- Peg length 10 to 100 mm: one car, or two or three one behind the other
- Two screws the cards hide, or mounting tape
- One piece, printed flat with no supports; the pegs come out in the title's colour
For the cars that stay in the packet
Some cars are never opened, and a shelf or a clip frame is hard on the card. This rail hangs each one the way the shop did: by the slot at the top of its card, on a flat peg that leans up towards the wall.
A title runs along the top, above the cards: the series, the year, or whose wall it is.
Along the wall
One rail holds one or two cards. A knob on its right end presses into the next rail's left end, so the row runs on as long as the collection does. Only the first rail needs a title; the rest can be low, plain rails.
Printing tips
- Print flat, pegs up, with no supports.
- One filament change when the rail is finished.
- The Bambu 3MF prints it at the sturdy setting: four walls and 25% gyroid infill. Use the same for an STL.
Selling tips
Sell it to collectors by the row: a titled rail and three plain ones hold eight cards. For loose cars there is the toy car garage wall.
Questions about the carded car peg rail
Which packets does it take?
Any carded car with a hang slot at the top of the card. The pegs are 112 mm apart by default, for standard cards about 108 mm wide; set the spacing wider, up to 120 mm, for wider cards. The peg is a flat blade 10 mm wide and 4 mm thick: hold a card's slot against those sizes before printing a wall of rails.
How do the rails join?
Each rail has a jigsaw knob on its right end and a socket on its left. Put the first rail up, then press the next one's socket over the knob and fix it. If it is tight, raise the fit setting.
How far apart do the rows go?
A standard card is about 165 mm tall. Put the next row of rails 180 to 190 mm below the first, so each title shows above its cards.
Will it damage the card?
It holds the card the way a shop peg does, by the slot made for it, so the corners and edges touch nothing. Don't overload a long peg: three cars deep is plenty.
How does it print?
Flat on its back with the pegs standing up, no supports. Change filament once when the rail is done; the title and the pegs print in the second colour. The Bambu 3MF prints it at the sturdy setting (four walls, 25% gyroid infill), which makes the pegs solid. For an STL use the same.
Can I sell it?
Yes, on the Seller plan. Sell a titled rail with plain rails as add-ons, in the buyer's colours.
Sellers also offer
Start selling the carded car peg rail
Type your customer's text, send them the picture, download the print file.
Early Black Fridaythrough Nov 30 (US Pacific time)
The Seller plan at $12 $6 a month
For your first 3 months, then $12. Every design, bulk lists, and the right to sell your prints. Comes off at checkout, no code needed.