Digital 3D print fileDownloads as STL3MF
Toy car garage wall that grows, with a name
Garage bays for 1:64 die-cast cars with dovetails on all four sides. Slide block onto block, sideways or upwards, and a few prints become a wall of cars under a sign with a name.
- Clad 2 colours, 2 filament swaps across 2 platesColours stacked in layers, like a clad coin: pause and swap filament where each colour starts. No AMS needed.
- Mint Set 2 pieces on 2 platesPrints as pieces that slot or press together; the studio shows it assembled.
What you download
toy-car-garage-wall-LIAMS-GARAGE.stlFor any slicer and any 3D printertoy-car-garage-wall-LIAMS-GARAGE.3mfA Bambu Studio project with the colours set
Digital files only. Nothing is posted: you print it yourself, for you or for your customers.
Single files and the Party pass and Season pass are for personal use and gifts. To sell prints you need an active Seller plan or Seller year pass; prints made while it is active stay yours to sell after it ends. The digital files themselves may never be shared or sold. Read the licence
- Size
- About 182 × 136 × 38 mm (18.2 × 13.6 cm) with the example text
- You type
- Name, Bays across, Bays high, Bay height, Lettering, plus 7 more options for fine-tuning
- Colours
- 2 parts (base, text), so it prints in 2 colours or as one
- Files
- STL for any slicer, plus a two-colour Bambu Studio project
Why sellers like it
- Dovetails on all four sides: the next block slides on beside, above or below
- One or two bays across and one to four high in a block, up to eight cars a print
- Bays share thin walls inside a block, so a wall uses less plastic than single boxes
- Bay length, height and depth are settings: 86 x 32 mm fits the long cars, 44 mm high takes vans and trucks
- The fit of the dovetails is a setting, for printers that print tight
- A name sign slides onto the top and stops flush with the front
- Prints on its back with no supports; the front edge prints in a second colour
A wall that grows with the collection
Toy cars arrive one at a time and never stop. This is a garage that keeps up: a block of bays with dovetails on all four sides, so the next block slides on beside it, above it or below it. Print six bays now and eight more next month.
Each car parks side-on in its own bay, where you see all of it and it can't roll away.
What you can set
- The block: one or two bays across, one to four high.
- The bays: 76 to 100 mm long, 28 to 50 mm high, 32 to 46 mm deep. Keep the length the same across a wall so the blocks line up.
- The sign: a name along the top, or none on the blocks that extend a wall.
- The fit of the dovetails, from 0.05 to 0.4 mm.
Printing tips
- Print a single bay first and slide two together to settle the fit.
- The block prints on its back; change filament for the last 1.2 mm to give the front edge its colour, or leave it one colour.
- The sign's sockets are closed at the front, so it slides on until it is flush and stops.
Selling tips
Sell the first block with the name sign, then plain blocks to extend it. For cars kept in their packets there is the carded car peg rail, and for a desk the toy car park.
Questions about the toy car garage wall
Which cars fit?
1:64 die-cast cars: Hot Wheels, Matchbox, Majorette and the like. A standard car is about 70 to 76 mm long, 30 mm wide and 25 mm high, and the longest are about 86 mm, which is the default bay. For vans, trucks and the tall ones set the bay height to 40 mm or more. Monster trucks are bigger than any of these settings.
How do the blocks join?
Every block has dovetails along its top and right side and matching sockets along its bottom and left side, running the full depth. Slide the next block on from the front. Blocks of the same bay length join above and below; blocks of the same bay height join side by side.
The blocks won't slide together. What now?
Raise the fit setting. It is the clearance in the dovetails: 0.15 mm suits a well-tuned printer, 0.25 to 0.3 mm one that prints a little fat. Print a single bay first to try it; that takes little plastic.
How does it go on the wall?
Each block has two screw holes through the back of its bays, countersunk, hidden behind the cars. On a wall, screw every second or third block and let the dovetails carry the rest. It also stands on a shelf or a desk with no fixing at all.
Do the cars roll out?
No. A car parks side-on, so it can only roll along the bay, and the bay's walls are at both ends.
How does it print?
On its back with the bays opening upwards, no supports. The last 1.2 mm, the front edge, prints in the second colour with one filament change. The sign prints flat, face up, on its own plate.
Can I sell it?
Yes, on the Seller plan. Sell a starter block with the child's name on the sign, and plain blocks as add-ons: buyers come back for more as the collection grows.
Ideas for selling it
More in personalised print ideas by occasion. Pricing an order? Try the profit calculator and the other free maker tools.
Sellers also offer
Start selling the toy car garage wall
Type your customer's text, send them the picture, download the print file.
Early Black Fridaythrough Nov 30 (US Pacific time)
The Seller plan at $12 $6 a month
For your first 3 months, then $12. Every design, bulk lists, and the right to sell your prints. Comes off at checkout, no code needed.