Digital 3D print fileDownloads as STL3MF
Sleeps till Christmas countdown sign
A standing countdown sign: turn the gold star one step every night in December and the number in the window drops by one, from 24 sleeps to a star on Christmas Day. The wheel stays hidden behind the sign, and the family's name is cut into the snow.
- Clad 3 colours, 2 filament swaps across 3 platesColours stacked in layers, like a clad coin: pause and swap filament where each colour starts. No AMS needed.
- Mint Set 5 pieces on 3 platesPrints as pieces that slot or press together; the studio shows it assembled.
What you download
christmas-countdown-dial-sleeps-till.stlFor any slicer and any 3D printerchristmas-countdown-dial-sleeps-till.3mfA Bambu Studio project with the colours set
Digital files only. Nothing is posted: you print it yourself, for you or for your customers.
Single files and the Party pass and Season pass are for personal use and gifts. To sell prints you need an active Seller plan or Seller year pass; prints made while it is active stay yours to sell after it ends. The digital files themselves may never be shared or sold. Read the licence
- Size
- About 174 × 42 × 167 mm (17.4 × 4.2 cm) with the example text
- You type
- Small line (under the number), Big line, Family line, Under the star, plus 14 more options for fine-tuning
- Colours
- 3 parts (base, text, accent), so it prints in 3 colours or as one
- Files
- STL for any slicer, plus a three-colour Bambu Studio project
Why sellers like it
- Turn the star, the number drops: a faceted gold star on the front is the knob, and it turns a number wheel hidden behind the sign
- The number sits in a thick stamp-edged window at the top, over "sleeps till" and a big script "Christmas"
- The star is the top of a tree standing in the snow, or the hanger of a bauble, or the bow of a wreath, with snowflakes falling either side
- The family's name is cut into the snow drift along the bottom
- Five flat pieces and no glue: the sign, the wheel, the star, a hex pin that joins the star to the wheel, and a slotted foot
- Prints in three colours with no supports, on three plates, and every plate is one stack of layers
One less sleep every night
Children count sleeps, not days. This is a shelf sign for that count. A stamp-edged window at the top shows one number, so the sign reads as a sentence: "24 sleeps till Christmas". Every night somebody turns the gold star on the front one step, the number drops by one, and on Christmas morning the window shows a star.
The star is what makes it. It is a faceted, three-dimensional star printed in its own colour, and it is the top of a tree standing in the snow, so the sign looks finished whatever day it is. Turning it is a small nightly job a child can do on their own. Behind the sign, a hex pin through the star turns a wheel of numbers that stays out of sight, so the numbers still to come are a surprise.
The number is the point of the sign, so it gets the strongest frame on it: a thick border with a postage-stamp edge of dots. Under it, "sleeps till" and a big script "Christmas" in Pacifico, Lobster, Dancing Script or Outfit. Snowflakes fall either side of the tree, and the family's name is cut into the snow drift along the bottom, so it shows in the sign's own colour. A bauble or a wreath can hang from the star instead of the tree, and a snowflake knob replaces the star for anyone who prefers it.
It stands in a low foot with a slot that leans the sign back by eight degrees, so it reads from across the room.
For a sign that reads as one line, "24 sleeps till Christmas", with the wheel's edge peeking out at the side, see the classic countdown.
Printing tips
- Colours: dark green for the sign and the wheel, cream for the words and the snow, and gold for the star and the foot. Red, white and gold, or navy, silver and gold work too.
- The sign and the wheel each print face up on a plate of their own, with one filament change at the top of the base. The foot, the star and the pin share the third plate in the third colour; the star prints face up with its socket underneath, and the pin prints lying on a flat side.
- Silk or metallic gold filament makes the most of the star's facets.
- Print at 3 mm in PLA or PETG. Check the assembled layout in the studio before printing: it shows the sign standing in its foot with 24 in the window.
Selling tips
This is a December gift for families with small children, and one they bring out every year. Sell it with the family's name in the snow, and offer it to teachers with the class name for a classroom countdown. It pairs with the advent calendar numbers and the family name tree for a Christmas bundle. Open orders in November: it takes three plates, so leave time for printing in the December rush.
Questions about the sleeps till christmas countdown
How does it go together?
Five pieces come off the plates: the sign, the wheel, the star, a short hex pin and the foot. Press the pin into the hex socket in the back of the star. Lay the sign face down, set the wheel on its back with the numbers facing the sign, then push the star's pin through the round hole in the sign from the front and into the hex hole in the wheel, turning the wheel until the hex lines up and 24 shows in the window. Stand the sign in the foot's slot. Nothing needs glue.
How does it count down?
Turn the star clockwise by one step each night, about a seventh of a turn. The hex pin turns the wheel with it, and the next number comes up into the window: 24, 23, 22 and so on, with a star after 1 for Christmas Day. The wheel is behind the sign, so nobody sees the numbers still to come. Turn it back to 24 on the first of December next year.
Does the star come loose?
The pin is a firm push fit in both the star and the wheel, and the hex shape means the star can't slip round on it. If your printer prints holes tight and the pin won't go in, raise the pin fit in All options a little; if it is loose, lower it.
How big is it?
160 mm wide and about 166 mm tall at the default width, with the foot 174 by 36 mm and the star 27 mm across. The number in the window is 11 mm tall. The width goes from 120 to 200 mm in All options and everything scales with it. The sign and the wheel are 3 mm thick.
Does it fit my printer?
At 160 mm wide or less it fits a 180 mm bed. It prints on three plates: the sign, the wheel, and the foot with the star and the pin. Wider signs need a 256 mm bed.
Can I change the words?
Yes. The first line is the short one under the number (sleeps till, days until, nights before), the second is the big script line (Christmas, Santa, the holidays). Leave the second line empty and the first line becomes the big one. The family line in the snow takes a family name, a class name or a message.
What sits under the star?
A tree standing in the snow with the star on top, a bauble hanging from it, a wreath with the star as its bow, or nothing. The snow drift, the snowflakes and the border line can each be turned off; without the snow the family's name stands as raised letters instead.
Can it show a 0 instead of a star?
Yes, choose a zero in All options. The star is the default because that is the day children are waiting for.
Ideas for selling it
More in personalised print ideas by occasion. Pricing an order? Try the profit calculator and the other free maker tools.
Sellers also offer
Start selling the sleeps till christmas countdown
Type your customer's text, send them the picture, download the print file.
Early Black Fridaythrough Nov 30 (US Pacific time)
The Seller plan at $12 $6 a month
For your first 3 months, then $12. Every design, bulk lists, and the right to sell your prints. Comes off at checkout, no code needed.