Digital 3D print fileDownloads as STL3MF

Family name Christmas tree

A Christmas tree with one bauble for every member of the family, each with a name on it, the family's name on a ribbon round the pot and the year on the star. Hangs on the tree or stands on a shelf.

What you download

  • family-name-tree-Dad-Mom-Liam-Emma.stlFor any slicer and any 3D printer
  • family-name-tree-Dad-Mom-Liam-Emma.3mfA Bambu Studio project with the colours set

Digital files only. Nothing is posted: you print it yourself, for you or for your customers.

Single files and the Party pass and Season pass are for personal use and gifts. To sell prints you need an active Seller plan or Seller year pass; prints made while it is active stay yours to sell after it ends. The digital files themselves may never be shared or sold. Read the licence

Size
About 111 × 170 × 4 mm (11.1 × 17.0 cm) with the example text
You type
Names (comma separated), Family line, Year, Hang or stand, plus 12 more options for fine-tuning
Colours
3 parts (base, accent, text), so it prints in 3 colours or as one
Files
STL for any slicer, plus a three-colour Bambu Studio project

Why sellers like it

  • One bauble per name from a single comma-separated list, up to ten, hung in rows from garlands across the tiers
  • The family's name runs on a swallow-tailed ribbon tied round the pot, and the year sits on the star
  • Every name prints at the same size, set by the longest, so the set reads as a set
  • Three colours in stacked layers: tree, baubles and lettering, with two filament swaps on a single-spool printer
  • Hangs from a sturdy ringed loop above the star, or stands on a shelf in a low slotted foot
  • Prints flat with no supports; from 100 to 220 mm tall

Everyone on the tree

The family's names, one on each bauble, on a tree that comes out of the decorations box every December. Grandparents get one with every grandchild on it; a couple's first Christmas gets two names and the year; an office gets the team. When a baby arrives, next year's tree has one more bauble, and the year on the star tells the trees apart.

Type the names as one list and the tree lays them out: the fewest on the top tier under the star, more on each tier down, each bauble on its own thread from a garland draped across the tier. The ribbon round the pot carries the family's name with a swallow tail at each end, and the star at the top carries the year. The tree is a plain tiered silhouette so the colours do the work: a deep green tree, red baubles, cream names.

It hangs from a thick ringed loop above the star, or stands on a mantel or a shelf in a low foot that holds it leaning back a little.

Printing tips

  • Classic: dark green tree, red baubles, white or cream names. For a quieter one, print the tree in white or wood-filled PLA with gold baubles and dark names.
  • The three colours are stacked, so add a filament change at the top of the tree (2.6 mm) and another at the top of the baubles (3.4 mm). On an AMS it prints in one job.
  • With seven to ten names, print at 200 mm or more. Names stay the same size across the set, so one very long name makes them all smaller; a bigger tree gives them back their room.
  • The standing foot prints upright on its own plate with its slot open at the top. Nothing needs supports.
  • At 0.2 mm layers a 160 mm tree takes about an hour and a quarter.

Selling tips

Sell it as the family's tree: ask for every name in one message and the year, and send one approval picture. Grandparents are the best buyers, with every grandchild on it, and they come back the next year for the new baby's bauble. Offer the hanging and the standing version at two prices, and pair it with a stocking name tag for each name on the tree.

Questions about the family name christmas tree

How many names fit?

Up to ten. The tree sorts them into rows with the fewest at the top: one bauble on the top tier under the star, then two, three and four below. The baubles are all the same size, so with seven or more names choose a bigger tree, 200 mm or more, to keep the names easy to read.

How big is it?

160 mm from the pot to the top of the star by default, about 125 mm wide, 2.6 mm thick with the baubles 0.8 mm above the tree and the names 0.8 mm above the baubles. The loop adds about 12 mm. Size goes from 100 to 220 mm in All options; a 220 mm tree still fits a 256 mm bed.

What goes on the ribbon and the star?

The family line goes on the ribbon round the pot and the year on the star. Leave the family line empty and the year moves down to the ribbon; leave both empty and the pot gets a plain rim and the star stays plain.

Can it stand instead of hang?

Yes. Choose the standing foot and a tab is added under the pot that drops into a slotted foot printed on a second plate, leaning back six degrees so it reads from across the room. The loop is left off. The assembled layout shows it standing, to check the look before printing.

How does it print in three colours on one spool?

The three colours are stacked: the tree first, the baubles, garlands, star and ribbon on top of it, and the names on top of the baubles. Add a filament change at the top of the tree layer and another at the top of the bauble layer and nothing needs a multi-colour printer. An AMS prints it in one go.

Can a long name fit?

Yes. The longest name in the list sets one size for all of them, so every bauble matches. Names up to about eight letters read well on a 160 mm tree; with longer ones pick a bigger size or a narrower font such as Outfit Bold.

Ideas for selling it

More in personalised print ideas by occasion. Pricing an order? Try the profit calculator and the other free maker tools.

Sellers also offer

Start selling the family name christmas tree

Type your customer's text, send them the picture, download the print file.

Personalise this design

Early Black Fridaythrough Nov 30 (US Pacific time)

The Seller plan at $12 $6 a month

For your first 3 months, then $12. Every design, bulk lists, and the right to sell your prints. Comes off at checkout, no code needed.

Get the Seller plan