Digital 3D print fileDownloads as STL3MF
Personalised holly wreath
A door wreath that prints flat: a ring of holly, pine or eucalyptus drawn leaf by leaf, with berries, a bow and a ribbon banner that carries the family's name and a greeting.
- Clad 3 colours, 2 filament swapsColours stacked in layers, like a clad coin: pause and swap filament where each colour starts. No AMS needed.
- One Strike One pieceComes off the plate ready to use, with nothing to put together.
What you download
holly-door-wreath-The-Johnsons.stlFor any slicer and any 3D printerholly-door-wreath-The-Johnsons.3mfA Bambu Studio project with the colours set
Digital files only. Nothing is posted: you print it yourself, for you or for your customers.
Single files and the Party pass and Season pass are for personal use and gifts. To sell prints you need an active Seller plan or Seller year pass; prints made while it is active stay yours to sell after it ends. The digital files themselves may never be shared or sold. Read the licence
- Size
- About 178 × 177 × 5 mm (17.8 × 17.7 cm) with the example text
- You type
- Family name, Greeting, Foliage, Bow, plus 6 more options for fine-tuning
- Colours
- 3 parts (base, accent, text), so it prints in 3 colours or as one
- Files
- STL for any slicer, plus a three-colour Bambu Studio project
Why sellers like it
- Holly leaves 38 mm long with three pointed lobes a side, a midrib and side veins, and berry clusters; pine sprigs with cones; round eucalyptus leaves with small berries; or all three mixed
- Forty-four big leaves in two rings, the outer ring pointing out and the inner ring pointing in, each grooved over the one before it, so the wreath has real depth and not a flat silhouette
- A ribbon banner with forked ends carries the family's name in script and a greeting under it
- A bow with two loops and two tails at twelve o'clock, the hanging hole through its knot, or behind the banner with the tails hanging below
- A 5 mm hanging hole for a ribbon or a door hook, through the bow's knot or a small leaf tab among the leaves
- Three colours in stacked layers on one plate, printed flat with no supports: 140 to 240 mm across
A wreath with your name on it
A wreath on the front door says the house is ready for Christmas, and a name on it says whose house. This one prints flat in three stacked colours and hangs from a ribbon: a ring of foliage drawn leaf by leaf, a bow, berries, and a ribbon banner across the bottom with the family's name in script and a greeting under it.
The foliage is the point. Forty-four big leaves lie in two rings, an outer ring pointing outward at a slant and an inner ring pointing inward and standing a little higher, each leaf grooved over the one placed before it, so you see every leaf rather than a green disc. Holly gets veins and clusters of three berries; pine sprigs get fans of needles that poke out past the edge, and cones; eucalyptus gets round leaves on arcing stems with small berries. The pattern is seeded, so the same order prints the same wreath every time.
The bow sits at twelve o'clock with the hanging hole through its knot, two loops and two tails, or behind the banner at the bottom with its tails hanging below. The banner has forked ends and a fine line inside its edge, and the lettering stands on it in the third colour.
Printing tips
- Classic: dark green leaves, red banner and berries, white or cream lettering. For eucalyptus try sage green, a cream banner and dark green letters.
- Print it at 3 mm in PLA, or PETG for a door that gets frost. The grooves between the leaves are 0.6 mm deep, so a 0.2 mm layer height shows them well; 0.12 mm looks even better on the veins.
- One plate. Put a filament change at 3 mm (the top of the leaves) and another at 3.8 mm (the top of the banner), or let a multi-colour printer do it.
- 180 mm fits an A1 mini or any 180 mm bed. On a 256 mm bed go to 220 or 240 mm: it reads from the street.
Selling tips
A wreath is a gift for a house rather than a person, which makes it a housewarming, a first-Christmas-together and a "for the new flat" present as well as a decoration. Offer the three foliages as three looks, keep the colour combinations to two or three you can print in batches, and photograph one on a real door. Shops and cafés buy one with their name for the door in December, and at a market stall a printed sample on the table sells the named ones, which you print to order after the fair.
Questions about the personalised holly wreath
How big is it?
180 mm across by default, which fits a 180 mm bed, with a banner 126 mm long and 22 mm tall whose name comes out about 11 mm tall, and 3 mm thick with the berries and banner standing 0.8 mm above the leaves and the lettering another 0.8 mm above the banner. Size goes from 140 to 240 mm in All options; a 240 mm wreath needs a 256 mm bed. The leaves, banner and bow all scale with it.
How does it hang?
There is a 5 mm hole at the top of the ring, through the bow's knot, or through a small oval leaf tab when the bow is at the bottom or left off. Thread a ribbon through it and tie a loop, or hang it straight on a door hook or a wreath hanger. At 3 mm thick it is light enough for a stick-on hook.
Which foliage should I pick?
Holly is the classic: lobed leaves with recessed veins and clusters of three red berries. Pine is the fullest, with needles fanning out past the edge and cones. Eucalyptus is the modern one, round leaves on arcing stems, and looks good in sage green with a cream banner. Mixed uses all three in turn.
Can the greeting be in another language or left out?
Both lines take any text the fonts have: Merry Christmas, Feliz Navidad, Happy Holidays, Joy, or the house number. Leave the second line empty and the first line grows to fill the banner. A long first line gets smaller to fit between the banner's forked ends.
Is it one piece or three?
One piece. The foliage, the red layer and the lettering print one on top of the other, with a filament change at the top of each layer, so a single-spool printer makes it with two pauses. On a multi-colour printer it prints straight through.
Will the leaf tips snap?
Every leaf tip is rounded, the holly leaves lie over a solid ring, and the pine needles are 2 mm wide and 3 mm thick. It is a wall piece, not a toy, and it hangs on a door fine. Print it in PETG if it will hang outside in frost.
Ideas for selling it
More in personalised print ideas by occasion. Pricing an order? Try the profit calculator and the other free maker tools.
Sellers also offer
Start selling the personalised holly wreath
Type your customer's text, send them the picture, download the print file.
Early Black Fridaythrough Nov 30 (US Pacific time)
The Seller plan at $12 $6 a month
For your first 3 months, then $12. Every design, bulk lists, and the right to sell your prints. Comes off at checkout, no code needed.