Digital 3D print fileDownloads as STL3MF
Earring stand with a name
A stand that keeps earrings in their pairs where they can be seen: rows of small holes for studs and hooks, notches along the top for hoops, and the owner's name across it. It leans back on two slotted feet and comes apart to travel flat.
- Clad 2 colours, 1 filament swapColours stacked in layers, like a clad coin: pause and swap filament where each colour starts. No AMS needed.
- Mint Set 3 pieces on 1 platePrints as pieces that slot or press together; the studio shows it assembled.
What you download
earring-stand-Emma.stlFor any slicer and any 3D printerearring-stand-Emma.3mfA Bambu Studio project with the colours set
Digital files only. Nothing is posted: you print it yourself, for you or for your customers.
Single files and the Party pass and Season pass are for personal use and gifts. To sell prints you need an active Seller plan or Seller year pass; prints made while it is active stay yours to sell after it ends. The digital files themselves may never be shared or sold. Read the licence
- Size
- About 130 × 86 × 154 mm (13.0 × 8.6 cm) with the example text
- You type
- Name, Rows, Width, Top edge, plus 9 more options for fine-tuning
- Colours
- 2 parts (base, text), so it prints in 2 colours or as one
- Files
- STL for any slicer, plus a two-colour Bambu Studio project
Why sellers like it
- Rows of holes in pairs, so every earring hangs beside its partner
- Notches along the top edge for hoops
- The owner's name across the top, in script
- Two to seven rows, 90 to 200 mm wide; rows spaced for long drops
- Leans back on two flat feet that slot on, with no glue
- Flat, face up, no supports
Pairs, in plain sight
Earrings kept in a dish end up as singles. On a stand each pair hangs side by side where it can be seen, so the morning's choice takes a moment, and nothing is missing its partner.
For a stall as well
Jewellery makers need a display that carries their name and packs flat for the car. The stand's feet pull off, and the plate goes in a folder.
Printing tips
- Print face up; change filament when the name starts. The feet print beside the stand in the first colour.
- White, cream or pale pink show earrings off; black suits silver and pearls.
- Small holes print best at a slower speed for the first layers.
Selling tips
Ask for the name and the colour. For first pierced ears, sell it with a pair of studs on it. For makers, offer two or three matching stands with their brand, and handmade tags for their packaging.
Questions about the earring stand
How many earrings does it hold?
The default stand has four rows of four pairs, so sixteen pairs, plus five notches for hoops along the top. A 200 mm stand with six rows holds forty-two pairs.
Do studs stay in?
Yes. Push the post through a hole and put the back on behind the stand, as you would on an ear. Hooks hang through the holes without their backs.
What size are the holes?
1.6 mm, which takes nearly every post and hook. If yours are thick, raise the hole size to 2 mm.
Will long earrings touch the row below?
The rows are 26 mm apart by default. For long drops, raise the gap between rows up to 50 mm; a stand with many rows sets them closer so it still fits the printer.
Does it fall over?
No. It leans back about ten degrees on two feet that reach further behind it than in front, so the weight of the earrings sits over the feet.
Can I sell it?
Yes, on the Seller plan. It sells as a birthday present with a name, and jewellery makers buy wide ones with their brand across the top for market stalls.
Ideas for selling it
More in personalised print ideas by occasion. Pricing an order? Try the profit calculator and the other free maker tools.
Sellers also offer
Start selling the earring stand
Type your customer's text, send them the picture, download the print file.
Early Black Fridaythrough Nov 30 (US Pacific time)
The Seller plan at $12 $6 a month
For your first 3 months, then $12. Every design, bulk lists, and the right to sell your prints. Comes off at checkout, no code needed.