Digital 3D print fileDownloads as STL3MF
Photo frame with a name in the frame
A photo frame with the family's name let into its lower edge, in the colour of the frame's body, so it is as flat as the frame and can't wear off. For 4 x 6, 5 x 7 and 6 x 8 inch photographs, 10 x 15 and 13 x 18 cm.
- Clad 3 colours, 1 filament swap across 2 platesColours stacked in layers, like a clad coin: pause and swap filament where each colour starts. No AMS needed.
- Mint Set 4 pieces on 2 platesPrints as pieces that slot or press together; the studio shows it assembled.
What you download
name-photo-frame-THE-JOHNSONS.stlFor any slicer and any 3D printername-photo-frame-THE-JOHNSONS.3mfA Bambu Studio project with the colours set
Digital files only. Nothing is posted: you print it yourself, for you or for your customers.
Single files and the Party pass and Season pass are for personal use and gifts. To sell prints you need an active Seller plan or Seller year pass; prints made while it is active stay yours to sell after it ends. The digital files themselves may never be shared or sold. Read the licence
- Size
- About 188 × 99 × 134 mm (18.8 × 9.9 cm) with the example text
- You type
- Name, Top line, Photo size, Upright or on its side, Lettering, plus 6 more options for fine-tuning
- Colours
- 3 parts (skin, core, back), so it prints in 3 colours or as one
- Files
- STL for any slicer, plus a three-colour Bambu Studio project
Why sellers like it
- The name let into the face, flush with it
- A second line along the top: a date, a class, a place
- Five photograph sizes, upright or on its side
- A backing plate that clicks in from behind
- Leans on two slot-on feet
- Flat, no supports, no glue
The name is part of the frame
A name on a frame is usually engraved on a plate or stuck on. Here it is in the frame's own face, in a second colour, level with the surface, and it will look the same in ten years.
Printing tips
- Print the frame face down on a clean, smooth plate: the face takes the plate's finish.
- Change filament once, after the thin face layers.
- Print the backing and the feet together on a second plate.
Selling tips
Ask for the name, the photograph's size and which way up. Offer to print the customer's photograph size list as a set for a wall of family frames.
Questions about the name photo frame
How is the name made?
The frame prints face down in three bands. First a thin face in one colour with the name left out of it; then the frame's body in a second colour, which shows through the letters. The name ends up flush with the face.
How does the photograph stay in?
It drops into a recess in the back, and a thin backing plate clicks past two small ridges behind it. If the backing is tight on your printer, raise the fit setting and reprint the backing; if it is loose, a strip of tape across the back holds it.
Is there glass?
No. The photograph sits behind the frame's lip with nothing over it, which keeps reflections away. For a photograph that will be handled, put a sheet of clear acetate in front of it.
How many colours does it need?
Three filaments at most on an ordinary printer: the face, the body, and the backing with the feet on a second plate. Print the backing and feet in the body's colour and it is two.
Can I sell these?
Yes, on the Seller plan. Each is made to order with a name and a photograph size.
Ideas for selling it
More in personalised print ideas by occasion. Pricing an order? Try the profit calculator and the other free maker tools.
Sellers also offer
Start selling the name photo frame
Type your customer's text, send them the picture, download the print file.
Early Black Fridaythrough Nov 30 (US Pacific time)
The Seller plan at $12 $6 a month
For your first 3 months, then $12. Every design, bulk lists, and the right to sell your prints. Comes off at checkout, no code needed.