Digital 3D print fileDownloads as STL3MF
Prescription pad holder with the clinic's name
A writing slope for the doctor's desk: the prescription pad lies at an easy angle, the clinic's name runs across the front lip, and the pen lies in a trough in front of the pad. Five flat pieces that slot together with no glue.
- Clad 2 colours, 1 filament swap across 2 platesColours stacked in layers, like a clad coin: pause and swap filament where each colour starts. No AMS needed.
- Mint Set 5 pieces on 2 platesPrints as pieces that slot or press together; the studio shows it assembled.
What you download
prescription-pad-holder-SHREE-CLINIC.stlFor any slicer and any 3D printerprescription-pad-holder-SHREE-CLINIC.3mfA Bambu Studio project with the colours set
Digital files only. Nothing is posted: you print it yourself, for you or for your customers.
Single files and the Party pass and Season pass are for personal use and gifts. To sell prints you need an active Seller plan or Seller year pass; prints made while it is active stay yours to sell after it ends. The digital files themselves may never be shared or sold. Read the licence
- Size
- About 168 × 188 × 67 mm (16.8 × 18.8 cm) with the example text
- You type
- Clinic name, Line under the name, Pad width (mm), plus 10 more options for fine-tuning
- Colours
- 2 parts (body, text), so it prints in 2 colours or as one
- Files
- STL for any slicer, plus a two-colour Bambu Studio project
Why sellers like it
- Holds an A5 pad by default, or any pad width from 90 to 160 mm
- A sloped deck at 15 degrees, adjustable from 8 to 25
- The clinic's name and a line for the doctor or phone number across the front lip
- A trough for the pen between the lip and the pad
- Five flat pieces slot together: the deck, two side cheeks, a back brace and the lip. No glue, no screws
- About 168 by 188 mm on the desk and 67 mm tall at the back
A slope to write on, with the clinic's name in front
A doctor writes dozens of prescriptions a day on a pad lying flat on the desk, often sliding about. This holder sets the pad at a gentle slope, the angle a writing desk has, and keeps it from sliding with a low stop along the front. In front of the stop is a trough where the pen lies, and in front of that the lip, with the clinic's name facing the patient.
Five flat pieces, slotted together
Nothing is glued or screwed. The deck is the sloped surface. Two side cheeks stand under it, and tabs along their top edges come up through slots in the deck. A brace crosses the cheeks at the back with halving slots, so they can't splay. The lip stands in a row of slots along the front of the deck. Each cheek has a cross cut through it.
Printing tips
- The deck prints on its own plate. The lip, cheeks and brace print together on a second plate, all 4 mm thick.
- Change filament at the top of the lip (4 mm) for the name: it is the only colour change.
- PLA is fine; PETG if it sits in a sunny window.
Selling tips
Pitch it to the doctor with their own name across the lip, in the clinic's colours. For medical reps and pharma marketing teams, it is a desk gift that stays in front of the doctor all day: quote a run of 25 or 50 with each doctor's name, made from one list in a bulk order on the Seller plan.
Questions about the prescription pad holder
Which pad sizes does it fit?
A5 (148 mm wide) is the default. Set the pad width in mm for any other pad: the deck is always 20 mm wider than the pad. A pad longer than the deck simply overhangs at the back.
How does it go together?
Push the two side cheeks' tabs up through the slots in the deck, slide the brace down onto the cheeks' back slots, then press the lip's tabs into the row of slots along the front. The tabs finish level with the deck, so the pad lies flat over them.
Is it steady enough to write on?
Yes. The cheeks carry the deck along most of its length, and the brace holds them upright. If the slots are loose for your printer, set the fit a little tighter in All options; if they are tight, a little looser.
Does it need an AMS?
No. The deck prints on its own plate in one colour. The lip, cheeks and brace print together on a second plate, where the only colour change is for the name on the lip.
Who buys these?
Doctors and clinics for their own desks, and pharma companies and medical reps, who hand them out with the doctor's name on them. That second group orders in dozens.
Ideas for selling it
More in personalised print ideas by occasion. Pricing an order? Try the profit calculator and the other free maker tools.
Sellers also offer
Start selling the prescription pad holder
Type your customer's text, send them the picture, download the print file.
Early Black Fridaythrough Nov 30 (US Pacific time)
The Seller plan at $12 $6 a month
For your first 3 months, then $12. Every design, bulk lists, and the right to sell your prints. Comes off at checkout, no code needed.