Digital 3D print fileDownloads as STL3MF

Doctor in / out sign for a clinic door, with a sliding status

A door sign with the doctor's name and degrees, and a window where IN, OUT or a third word such as ON ROUNDS slides into view when you push the knob beside it. Three flat pieces that press together, with the screws hidden under the face.

What you download

  • doctor-status-sign-Dr-Grace-Carter.stlFor any slicer and any 3D printer
  • doctor-status-sign-Dr-Grace-Carter.3mfA Bambu Studio project with the colours set

Digital files only. Nothing is posted: you print it yourself, for you or for your customers.

Single files and the Party pass and Season pass are for personal use and gifts. To sell prints you need an active Seller plan or Seller year pass; prints made while it is active stay yours to sell after it ends. The digital files themselves may never be shared or sold. Read the licence

Size
About 129 × 118 × 12 mm (12.9 × 11.8 cm) with the example text
You type
Doctor's name, Degrees, First word, Second word, Third word, plus 13 more options for fine-tuning
Colours
3 parts (back, face, text), so it prints in 3 colours or as one
Files
STL for any slicer, plus a three-colour Bambu Studio project

Why sellers like it

  • The doctor's name, degrees and a line for visiting hours or the room number
  • A window that shows IN or OUT, or three words such as IN, OUT and ON ROUNDS
  • The words are on a strip that slides inside the sign: push the knob and the next word shows, with a tick at every stop
  • Three flat pieces: the back plate, the strip and the face, which presses onto four pegs. No glue
  • Screws go through the back plate and are hidden under the face; or tape, or the Swap Wall Mount
  • About 125 by 120 mm with two words, a little taller with three

IN or OUT, at a push

Patients waiting outside a doctor's cabin want to know one thing: is the doctor in? A paper sign gets lost, and a flip card hangs crooked. This sign shows the answer in a window, and changing it is one push of a knob.

The top of the sign carries the doctor's name and degrees over a short rule. Below them is the window, with DOCTOR IS over it, and a line underneath for visiting hours or the room number. The words in the window are printed on a strip inside the sign. A knob on the strip stands up through a slot beside the window: push it down and OUT slides into view, push it up and IN comes back. With a third word (ON ROUNDS, BACK SOON) there is a middle stop, marked by a tick beside the slot.

Three flat pieces

  • Back plate: screwed to the door through two holes in its pocket, where the screw heads are hidden. The pocket is where the strip slides.
  • Strip: the words, one above the other, and the knob.
  • Face: the name, the window and the slot. It presses onto four pegs on the back plate, which show through as small dots in the back plate's colour.

There is no glue, and nothing to wear out. Magnets or studs for the Swap Wall Mount, or a flat back for tape, are in All options.

Printing tips

  • Print the back plate on its own plate, and the face and strip together on a second. Everything prints face up, with no supports.
  • The face and the strip are the same thickness, so their words start at the same layer: change filament there for the lettering, the window frame and the knob.
  • Use PLA or PETG. Keep the default fit for the pegs, and only change it if the face is loose or too tight.

Selling tips

Clinics with several doctors want a matching sign on every door. Pair it with a set of clinic direction signs for the corridor, and show the sign assembled in the clinic's colours when you pitch it. Offices buy the same sign for managers' cabins with IN and IN A MEETING.

Questions about the doctor status sign

How does the sliding status work?

The words are printed one above the other on a strip that lies in a pocket inside the sign. A knob on the strip comes up through a slot beside the window. Push it down and the strip slides until the next word sits in the window. The slot's ends stop it at the first and last word, and a small tick beside the slot marks every stop.

Can I change the words?

Yes, all of them. IN and OUT are the defaults, and a third word is optional: ON ROUNDS, BACK SOON, IN SURGERY. The small line over the window (DOCTOR IS) can say anything too, or be left empty. A manager's cabin can use IN and IN A MEETING.

How is it put together?

Screw the back plate to the door through the two holes in its pocket, lay the strip in the pocket with its knob towards the right, and press the face down onto the four pegs. The pegs finish level with the face and show as four small dots. If the face is loose, set the fit a little tighter in All options and reprint it.

How many colours does it need?

Three looks best: the back plate in one colour so it frames the face, the face and strip in a second, and the words in a third. The words on the face and on the strip start at the same layer, so the face plate needs one filament change and no AMS.

Can I make one for every doctor?

Yes. On the Seller plan, paste the doctors' names one per line into a bulk order and you get a ZIP with one sign per doctor, all in the same layout. Everything but the name is shared by the list, so group doctors with the same degrees line, or leave it empty; a doctor with different degrees gets a sign of their own from the studio.

Ideas for selling it

More in personalised print ideas by occasion. Pricing an order? Try the profit calculator and the other free maker tools.

Sellers also offer

Start selling the doctor status sign

Type your customer's text, send them the picture, download the print file.

Personalise this design

Early Black Fridaythrough Nov 30 (US Pacific time)

The Seller plan at $12 $6 a month

For your first 3 months, then $12. Every design, bulk lists, and the right to sell your prints. Comes off at checkout, no code needed.

Get the Seller plan