Digital 3D print fileDownloads as STL3MF
Window status slider: clean or dirty, in or out
A sign that says one of two things and changes with a fingertip: CLEAN or DIRTY on the dishwasher, IN or OUT on an office door, FREE or IN USE on a meeting room. Both words are on one sliding tile; a window shows only one of them.
- Clad 3 colours, 2 filament swaps across 2 platesColours stacked in layers, like a clad coin: pause and swap filament where each colour starts. No AMS needed.
- Mint Set 3 pieces on 2 platesPrints as pieces that slot or press together; the studio shows it assembled.
What you download
window-status-slider-DIRTY.stlFor any slicer and any 3D printerwindow-status-slider-DIRTY.3mfA Bambu Studio project with the colours set
Digital files only. Nothing is posted: you print it yourself, for you or for your customers.
Single files and the Party pass and Season pass are for personal use and gifts. To sell prints you need an active Seller plan or Seller year pass; prints made while it is active stay yours to sell after it ends. The digital files themselves may never be shared or sold. Read the licence
- Size
- About 154 × 42 × 6 mm (15.4 × 4.2 cm) with the example text
- You type
- Left word, Right word, Title, Window width, plus 6 more options for fine-tuning
- Colours
- 3 parts (base, tile, text), so it prints in 3 colours or as one
- Files
- STL for any slicer, plus a three-colour Bambu Studio project
Why sellers like it
- Both words on one tile inside the sign; a window shows one and hides the other
- Your own two words, up to ten letters each
- A line over the window: DISHWASHER, a room, the family's name
- The tile is shut in by an end cap and can't come out
- A flat back for magnetic tape or double-sided tape
- Three colours with never two in a layer; no supports
One word at a time
Is the dishwasher clean? Every household asks it daily. A sign with both words on it and an arrow doesn't help; a sign that shows one word and hides the other does.
Any two words
CLEAN and DIRTY are only the defaults. IN and OUT, FREE and IN USE, OPEN and CLOSED, FED and NOT YET: type the two words and the line over the window.
Printing tips
- Print the sign with its back on the bed, and the tile and cap on their own plate in a light colour, with the words on top in a dark one.
- Change filament once on each plate, when the words start.
- Clear any strings from the channel before sliding the tile in.
Selling tips
Sell the dishwasher version ready-made and offer custom words. It pairs with the slider chore chart for the same kitchen.
Questions about the window status slider
How does it work?
A tile twice as wide as the window slides in a channel inside the sign. It carries both words side by side. Push it one way and the window shows one word; push it the other way and it shows the other. The word you don't want is under the sign's face, out of sight.
How does it go together?
Slide the tile into the channel from the right-hand end, then press the end cap in after it. A small notch in the face lets a fingernail get the cap out again.
How does it stay on a dishwasher?
The back is flat. Stick on a strip of self-adhesive magnetic tape for a steel door, or double-sided tape for anything else.
Does the face over the tile need supports?
No. It is a short bridge across the channel, about 22 mm, which printers handle without supports. Print with the sign's back on the bed.
The tile is stiff. What should I change?
Raise Fit by 0.05 mm and reprint the tile, and check the channel for strings from the bridge. It should slide with one finger and stay where it is left.
Can I sell it?
Yes, on the Seller plan. The dishwasher version sells all year; offices buy the meeting room version by the door.
Ideas for selling it
More in personalised print ideas by occasion. Pricing an order? Try the profit calculator and the other free maker tools.
Sellers also offer
Start selling the window status slider
Type your customer's text, send them the picture, download the print file.
Early Black Fridaythrough Nov 30 (US Pacific time)
The Seller plan at $12 $6 a month
For your first 3 months, then $12. Every design, bulk lists, and the right to sell your prints. Comes off at checkout, no code needed.