3D printed signs for clinics: doctor IN / OUT, direction arrows and pill clips
What a 3D print seller can make for a clinic, and how to sell it: a doctor IN / OUT door sign with a sliding status, corridor direction signs in English and Hindi, a prescription pad holder and pill reminder clips for chemists.
Every clinic has the same handful of problems: patients who don't know if the doctor is in, patients who can't find the pharmacy or the lab, and patients who go home and forget which tablet to take when. Most clinics solve them with paper taped to walls.
What to know first
- Signs work as a system. NHS Scotland's wayfinding guidance for healthcare buildings (the successor to the old HTM 65 "Signs" memo) treats signs as one planned route from the entrance to each room, not a sign here and there. For a small clinic that means the same words, colours and arrows at every turn.
- Letter size depends on reading distance. There is no Indian rule for private clinic signs, but the US ADA Standards, section 703.5 are a useful yardstick: visual characters at least 16 mm tall when read from under 1.83 m, plus about 3.2 mm for every extra 305 mm of distance. A corridor sign read from four or five metres needs much bigger capitals than a door plate read from arm's length.
- Pictures help, but only with words. A study of adults with low health literacy found that many standard medication label pictographs were hard to understand on their own, and the work it reviews found that a picture together with words was understood best. So pair every symbol with text.
A clinic is one buyer who needs a matching set, in their colours, with their doctors' names on it. Here are four designs for clinics and pharmacies, and how to sell them.
A doctor IN / OUT sign that slides
The doctor status sign goes on the cabin door. It carries the doctor's name and degrees, a line for visiting hours or the room number, and a window with DOCTOR IS over it. The word in the window is printed on a strip that slides inside the sign: push the knob beside the window and IN slides away and OUT comes into view.
It can take a third word as well (ON ROUNDS, BACK SOON, IN SURGERY), with a tick beside the knob's slot marking the middle stop. All the words can be changed, so the same sign works for a dentist (AVAILABLE / BUSY) or a manager's cabin (IN / IN A MEETING).
It is three flat pieces with no glue: a back plate screwed to the door (the screws are hidden under the face), the sliding strip, and the face, which presses onto four pegs. Print the back plate on one plate and the face and strip on another; both have their lettering start at the same layer, so one filament change does it.
Direction signs for every corridor
A clinic with a pharmacy, a lab and a waiting area needs signs at every turn. The clinic direction sign makes the whole set from one design. For each sign you set:
- The destination: RECEPTION, PHARMACY, LAB, X-RAY, WASHROOM.
- A second line: the same word in Hindi (फार्मेसी, शौचालय), a floor, or room numbers.
- The picture: medicines, doctor, reception bell, flask, sample drop, heart, washroom, stairs, lift or waiting area.
- The arrow: left, right, straight ahead, down, or one of the four diagonals.
The arrow sits at the end it points to, and the picture is knocked out of a solid tile so it shows in the plate's colour.
Take the list on a walk
The order is a list, and the best way to get it right is to walk the building with the owner. Start at the entrance and write down every sign as you go, with its arrow:
RECEPTION
PHARMACY
LAB
WASHROOM
WAITING AREA
Each sign has its own arrow and picture, so make them one by one in the studio. Where a run of signs shares an arrow and picture (ROOM 1 to ROOM 12 down one corridor), a bulk order on the Seller plan makes the run from one list. Print one sample first and hold it up on the wall: corridor signs are read from a few metres away (see the letter-size yardstick above), so check the size there, not on your desk.
A prescription pad holder for the doctor's desk
The prescription pad holder is a small writing slope. The pad lies on a deck at 15 degrees with a low stop along the front, the pen lies in a trough in front of the stop, and the lip in front carries the clinic's name. It is five flat pieces that slot together: the deck, two side cheeks, a brace and the lip.
There is a second buyer for this one: pharma companies and medical reps, who give doctors desk gifts with the doctor's own name. That order is a list of doctors, and a bulk order turns it into one file per doctor.
Pill reminder clips for the chemist
The pill reminder clip slides onto a strip of tablets and shows when to take them: a rising sun, a midday sun and a moon, with the dose under each. Type the dose the way doctors write it, 1-0-1, and the clip does the rest. A note along the bottom says AFTER FOOD or BEFORE FOOD, in English or Hindi.
The pictures help patients who struggle with small print or reading, and the dose and food note are written out beside them, which is the picture-plus-words pairing the research above favours. A chemist who wants to hand clips out could keep a box of the common doses (1-0-1, 1-1-1, 0-0-1, 1-0-0) with their own name in the medicine line. That is an order in hundreds, and it can repeat.
How to sell to a clinic
- Lead with the door sign. Print one with the doctor's own name, assembled, in the clinic's colours, and show it at the clinic. Everything else follows from that.
- Quote the set. Door signs per doctor, direction signs per piece, a pad holder per desk, plus a spare direction sign or two.
- Keep the list. Clinics add doctors and move rooms around. Keep their order on file and a new sign is a quick reorder.
- Go to new clinics. A clinic that has just opened or moved needs everything at once.
See the clinics and pharmacies ideas page for the designs with example text, ready to open in the studio.
Planning what to make next? Browse personalised print ideas by occasion, or work out prices, party orders and colour changes with the free maker tools.