A dishwasher clean dirty sign to 3D print, with a slider that shows one word
A dishwasher clean dirty sign where both words sit on one sliding tile and a window shows only one of them. How the window works, how it stays on the door, other pairs of words for offices and pets, and how to print it.
What to know first
A shared dishwasher causes a small daily argument: someone opens it to put a mug in and finds clean plates, or unloads it and finds last night's dinner. The machine itself doesn't make it any easier to stop half-full: Energy Star advises that dishwashers use about the same energy and water however many dishes are inside, so it pays to load them up and run full loads. A clean/dirty sign lets the house fill it without guessing.
Most of these signs are magnets with both words printed on and an arrow or a flip, which is easy to misread first thing in the morning. A sign that shows only one word at a time avoids that. Before you put one on a door, check the door: austenitic stainless steel, common on appliances, is usually non-magnetic, so test with a fridge magnet and use double-sided tape if it doesn't stick. Keep the sign on the outside of the door and clear of the steam vent; Prusa notes that PLA softens above about 60 °C.
The window status slider shows one word at a time and hides the other.
How the window works
The sign is a flat frame with a window in its face and a channel inside it. A tile twice as wide as the window runs in the channel, carrying both words side by side: DIRTY on the left, CLEAN on the right. Push the tile one way and the window shows CLEAN. Push it the other way and it shows DIRTY. The word you don't want sits under the face of the sign, out of sight.
A line of small words runs over the window. By default it says DISHWASHER, but it can be a room, a person or the family's name: THE JOHNSONS' KITCHEN, or just MOM'S.
The tile can't fall out. It slides in from the right-hand end, and an end cap presses in after it. A small notch in the face lets a fingernail lift the cap out again if the tile ever needs cleaning.
Putting a clean dirty dishwasher magnet on the door
The back of the sign is flat. For a magnetic steel dishwasher door, stick a strip of self-adhesive magnetic tape along it and it becomes a magnet. For a panelled or plastic door, use double-sided tape instead. Either way it sits flat against the door and the tile slides with one finger.
If the tile feels stiff, the page has a Fit setting: raise it by 0.05 mm and reprint the tile, and clear any strings from inside the channel. It should slide easily and stay where it is left.
Other pairs of words
CLEAN and DIRTY are only the defaults. The two words are yours to type, up to ten letters each, and the line over the window too. Some pairs that work:
- A study or home office door: ON A CALL and COME IN, over DAD'S OFFICE.
- A meeting room: IN USE and FREE, over MEETING ROOM 2.
- The dog's dinner: NOT YET and FED, over MAX'S DINNER, so nobody feeds him twice.
- A shop door: OPEN and CLOSED.
- A bathroom or changing room: a pair for in use and free.
- Someone's whereabouts: IN and OUT.
The window can be made wider for longer words. The pet example uses a 52 mm window and the office door one 60 mm.
For a whole household's jobs rather than one machine, the slider chore chart uses the same idea of a slider that can't be lost, and our post on it covers how families use it. Offices that want a sign on every room can look at the meeting room sign.
Printing it
The sign prints with its back on the bed, and the face over the tile is a short bridge of about 22 mm across the channel, which printers handle without supports. The tile and the end cap go on a plate of their own.
It uses three colours, and no layer has two of them, so it prints on a single-spool printer with a filament change on each plate when the words start. Print the tile in a light colour with the words on top in a dark one, so the word in the window reads from across the kitchen. Before sliding the tile in, check the channel for strings left by the bridge.
Selling it
The dishwasher version isn't seasonal, so it can stay listed all year. Sell the default CLEAN and DIRTY sign as it is, and offer custom words and a custom line over the window for people who want their name on it. Offices may want a meeting room version for every door, so quote those per room.
It also sits well beside other kitchen pieces with the same name on them: a kitchen conversion chart for the cupboard door makes a housewarming set. The housewarming gifts page has more for a new kitchen.
The right to sell the prints comes with the Seller plan.
Planning what to make next? Browse personalised print ideas by occasion, or work out prices, party orders and colour changes with the free maker tools.