Doctor's door signs with changeable visiting hours: one sign per door, a strip for the hours
A doctor name plate with timings that change without a new sign: the hours sit on a strip that slides out and is swapped. How the changeable clinic door sign works, what to print it in, and the IN / OUT sign and token board that go with it.
A doctor's name on a door lasts for years. The visiting hours change with every rota, every new partner and every holiday. A name plate with timings engraved into it is out of date the first time the hours move, which is why clinic doors often carry a good name plate with a paper notice taped under it. The answer is to keep the two apart: a permanent part for the name and room, and a replaceable part for the hours.
What to check first
- What the sign must say. Name, degrees or speciality, room number and hours.
- Accessibility rules for room signs. In the US, the 2010 ADA Standards for Accessible Design treat signs identifying permanent rooms, such as room numbers, as designations that need raised characters and braille (sections 216.2 and 703). Occupant names and signs up for seven days or less are exempt. So a US clinic still needs a compliant room number sign beside a printed name plate. Other countries have their own rules.
How the sign works
The doctor's room sign carries the doctor's name large, the degrees under it and the room number in a badge. The visiting hours are on a strip that sits in a channel cut into the face, shut in by an end cap.
To change the hours, pull the end cap out of the channel, slide the strip out, slide the new one in and push the cap back. To make a new strip, change the hours and print the strips only. The sign stays on the door.
The default reads Dr. Emma Johnson, MD . PEDIATRICS, ROOM 12, with MON - SAT 10 AM - 1 PM on the strip. The examples on its page include a dentist with no room number, and a clinic in India where the badge says OPD instead of ROOM and the strip has two sessions: MON - SAT 10 AM - 1 PM 5 - 8 PM. The sign is 170 to 250 mm across, with two screw holes.
Spare strips for the days that are different
Up to five spare strips print with the sign. They are for the notices a door needs now and then: ON LEAVE TODAY, BY APPOINTMENT ONLY, CLOSED FOR LUNCH. Type them with commas between them. When the doctor is away, the receptionist slides in ON LEAVE TODAY and saves the patients a wait.
Printing it: three filaments
The sign needs three filaments on an ordinary printer, as its page says: the sign with one filament change where the words start, and the strips printed on their own on a second plate, with the cap. The strips can be printed in the words' colour to save a spool. PLA is fine on an indoor door; for an entrance in sun, PETG is the better choice, since Prusa lists it as water and humidity resistant and suited to outdoor use. Everything prints flat, with no supports and no glue; the channel is cut into the face and needs none.
If a strip is tight or loose in the channel, change the clearance setting and reprint the strips and cap. More clearance makes them looser.
IN or OUT beside it
Patients outside a cabin also want to know whether the doctor is in. The doctor status sign has the name and degrees on top and a window underneath, where IN, OUT or a third word such as ON ROUNDS slides into view when you push a knob beside it. It is three flat pieces that press together, with the screws hidden under the face, and about 125 by 120 mm with two words.
A clinic with several doctors can have a status sign for every cabin. On the Seller plan, paste the doctors' names one per line into a bulk order and you get one sign per doctor in the same layout. Everything but the name is shared by the list, so group doctors with the same degrees line.
The waiting room
The token board keeps numbered tokens on pegs behind the reception desk, each number printed on the board where its token hangs. A number you can read is a token that is out, so reception can see at a glance who is still waiting. Two boards can run 1 to 20 and 21 to 40. It is made for the pickup token, and a take-a-number queue for salons and clinics explains how a token queue runs.
Selling to clinics
Clinics need one room sign per door, all in the same style, and new strips when the rota changes. Quote per door and include two spare strips with each sign. Show a sign printed in the clinic's colours, with a status sign beside it, when you pitch. Physiotherapists, dentists and vets use the same signs, and so do lawyers and accountants with office hours on the strip.
More ideas for the same customers are on clinics and pharmacies. Selling these needs the Seller plan, which also brings bulk orders.
Planning what to make next? Browse personalised print ideas by occasion, or work out prices, party orders and colour changes with the free maker tools.