Personalised gifts for gamers to 3D print: a gamer name sign, a controller for the door and a headphone stand
Three Christmas presents for gamers of any age, each with their name on it: a pixel sign with lives in hearts, a controller-shaped sign for the door and a stand for their headphones. What each one is, how it prints, and how to sell them as a set.
Gamers are not a niche. The Entertainment Software Association's Essential Facts report says 212.3 million Americans play video games every week, across every age group. That makes "a gamer" a hard brief: the games and hardware they actually want are expensive, and gamers of different ages want different things. A safe middle ground is something for the room where they play, with their own name or gamer tag on it, built from the shared language of games rather than one company's characters.
That shared language is old. Limited lives, usually three, became common in arcade games in the 1980s, and a row of small heart icons is one of the familiar ways games show a player's health. Here are three pieces to 3D print for Christmas that use it, from a gamer name sign for a ten-year-old's door to a stand for an adult's headphones.
A pixel sign with lives left
The pixel hearts name sign looks like the screen of an old arcade game. PLAYER 1 runs across the top, the name sits in the middle in chunky pixel letters, and a line along the bottom says something like LEVEL 10 UNLOCKED. Under that is a row of pixel hearts for lives, up to eight of them, and you choose how many are full. The rest are drawn as outlines.
Both lines are yours to change. For a birthday that falls near Christmas, HAPPY BIRTHDAY on top and LEVEL 8 UNLOCKED underneath does the job of a card. With no hearts full and GAME OVER underneath, it goes on the door of a teenager who is not getting up.
It stands on a desk or a shelf on two feet that slot on, or it goes on a door with two holes. It comes in widths from 130 to 240 mm, and the corners are stepped like a box drawn in pixels. The pixel lettering sets long names wide, so there are three plainer faces for those.
A controller for the door
The game controller name sign is a controller shape for the wall: two grips, a cross of direction buttons, four round buttons and two sticks. A bar from grip to grip carries the name, LIAM'S GAME ZONE by default, and a word in the middle of the pad says PLAYER 1, or nothing.
It is a plain controller shape of our own, not any maker's, with no logo or button symbols on it. Console makers' logos and designs are their intellectual property, and leaving them off also means it suits whichever consoles they play on. It is 130 to 240 mm across and hangs on a pin through a small hole at the top or on adhesive strips. A child's version says the room's name; a grown-up's says DO NOT DISTURB with GAMING in the middle.
Somewhere for the headphones
For the adult gamer, or anyone who plays with a headset on, the headphone stand has a broad foot with the name on it, an upright post and a wide domed cradle that spreads the headband so it keeps its shape. It is up to 225 mm tall, for over-ear headphones, and a gamer tag looks right on the foot in a condensed bold face.
The controller wants a place too: the sunset controller stand slots together from four flat pieces, with the name on a rail across the front, and the Now Playing stand holds the current game cover out beside it. Both are in a tidy console shelf with a name on it.
Printing them
The two signs print flat, face up, with no supports, and no glue. Each takes one filament change, where the letters, hearts or buttons start, so there is no need for a multi-colour printer. A dark base with a bright second colour reads like a screen: black with red or green, navy with yellow, or dark grey with teal. Match the controller's buttons to the console's lights or the room. The pixel corners stay sharp with a 0.4 mm nozzle.
The headphone stand prints standing, foot down, with a 45 degree shoulder under the cradle so it needs no supports. On a single-spool printer the name is a tile printed flat on its own plate, with one filament change, and pressed into a pocket in the foot with a drop of glue. With a multi-colour printer, pick that version in the studio and it prints in one piece. Use at least three walls for a stiff post.
Selling them before Christmas
The three work as a set. The pixel sign and the controller sign are a pair for the same door, with the controller over the console, and the headphone stand is the step up for older brothers, dads and streamers. Ask for the name or gamer tag, the colours of their setup, and for the pixel sign how many hearts should be full.
For games cafés, youth clubs and classes, make one each. Paste the names one per line into a bulk order; bulk orders and the right to sell come with the Seller plan.
For more for the same person, the stocking fillers ideas page has small things with a name on them, and board games to 3D print as gifts covers presents for the family that plays at the table instead.
Planning what to make next? Browse personalised print ideas by occasion, or work out prices, party orders and colour changes with the free maker tools.