A controller stand and a game case display to 3D print: a tidy console shelf with a name on it
A controller stand that fits any controller and carries the player's name, and a Now Playing stand that holds the current game cover out in a slot cut to the case. How to measure the case, how the slot-together stand goes together, which colours work, and how to sell them as a shelf set.
The shelf by the console fills up fast. Controllers end up on the sofa, under a cushion or on the floor. The game being played sits on top of a pile with the others, and the one you want next is somewhere underneath.
Two things help: a fixed place for the controller, and a stand that shows the game being played.
What to know first
- Controllers differ in shape, so don't copy one. A stand that grips a particular controller's outline only fits that controller. One the controller simply rests on, with adjustable spacing, fits most of them.
- Cases differ in thickness. Wikipedia's keep case table gives DVD cases as typically 15 mm thick, but games, films, cartridges and records all use different boxes. Measure across the spine before you set a slot.
- Leave the brands out. Game titles, console names and characters belong to their owners; the UK government's overview of intellectual property counts product names, brands and the look of products among the things that can be protected. A stand that says NOW PLAYING and a name works for every game without borrowing anyone's artwork.
Below are two stands built on those ideas. Both carry a name, and both print flat on the bed with no supports.
Where the controller lives
The sunset controller stand gives the controller a fixed place. A round sun, 160 to 210 mm across and striped across its lower half, stands at the back with two palms against it, one palm or none. The controller sits on two side rails and leans back on the sun. A rail across the front carries the name and stops it sliding off.
Nothing on the stand grips the controller, which is why it fits any of them. It doesn't need to match a shape. For a small or a large controller, set:
- The room between the front rail and the sun: 45 to 80 mm.
- The gap between the side rails: 50 to 100 mm.
The name rail takes a name or a gamer tag. A script face suits a short name like Emma; a gamer tag like NOVA_X looks right in bold capitals.
How the stand goes together
It is four flat pieces: the sun, the name rail and two side rails. Each side rail has two slots. The sun drops into the back pair and the name rail into the front pair, each with matching slots cut up from its bottom edge, and both lean back a little. They push together by hand with no glue and pull apart again, so the stand can go in a drawer or an envelope.
If the slots are tight or loose, change the clearance: more if the pieces won't go in, less if they wobble. 0.2 mm suits most printers. Reprint a side rail to test a new clearance, since it is the quickest piece.
Where the current game stands
The Now Playing case stand holds the game being played cover out, with NOW PLAYING raised on the block in front of it and a name underneath. The case leans back 8 degrees in a slot cut to its thickness.
With two or three slots in a row, the games to play next wait behind the first. When one is finished, the next moves forward. The slots are open at both ends, so a case can be wider than the stand. 140 mm suits a disc case.
The words are yours. A heading and a line under it, or one of them alone, which then comes out bigger: UP NEXT, NOW READING, GAME OF THE YEAR.
Measuring the case
The slot is cut to the thickness you enter, from 6 to 22 mm, and adds its own clearance. Enter the case's own thickness and nothing more.
- Disc cases for current consoles: about 14 to 15 mm. 14.5 mm is the default.
- Cartridge cases: about 11 mm.
- A film case: 14 mm.
- A record in its sleeve: 4 to 6 mm, with the stand at its full 200 mm width.
Measure yours across the spine with a ruler or calipers and enter that.
The same stand works for films, records and books. Change the heading to NOW SPINNING for a record player or NOW READING for a bedside table.
Colours
For the controller stand, a deep purple or navy sky with an orange or pink sun gives the look of an evening on the coast. Black side rails disappear under the controller; rails in the sun's colour make more of them.
For the case stand, match the block to the shelf or the console and pick a bright colour for the words. The words are raised on top, so the second colour shows only on them.
Printing
Neither stand needs a multi-colour printer.
- The controller stand takes three colours. The sun and the name rail print on one plate in the sky colour, with one filament change to the sun colour for the top layers. The side rails print on their own in a third colour, or the sky colour again. Everything prints flat and face up. The Bambu 3MF prints it at the sturdy setting, four walls and 25% gyroid infill. Use the same for an STL, because the side rails are thin and carry the controller.
- The case stand is one solid block. It prints as it stands, flat on its base, with no supports: the slot leans only 8 degrees. Change filament once, a millimetre from the top, for the words. The block runs on behind the last slot, under the leaning case, so it doesn't tip. The Bambu 3MF prints it at the weighted setting, 40% gyroid infill; use the same for an STL.
Selling them
Both are made to order, so ask for the name or gamer tag, the colours, and for the case stand the case thickness and the words.
- Sell them as a shelf set. The controller stand and the case stand go together by the console, and the controller stand posts flat.
- Offer case stands to shops. Game shops, cafés and libraries could use them for staff picks and new releases, in threes and fours with their own words.
- Add a small extra. A cheat code keychain is a quick print to put in the parcel. The sunset vanity plate shares the controller stand's sun and palm, for a matching sign on the wall.
- Fill out the room. The headphone stand and the game controller name sign suit the same buyer.
All of these are our own designs, with no game's name or artwork on them, so they suit whatever is being played. If you are printing for a big release day, our post on things to 3D print for GTA 6 launch night puts these together for the occasion. For presents, see gifts for gamers to 3D print with their name and the gifts for gamers ideas page.
Planning what to make next? Browse personalised print ideas by occasion, or work out prices, party orders and colour changes with the free maker tools.