Gifts for gamers to 3D print and sell: name signs, a turn order tracker and a headphone stand

A name sign with pixel hearts, a controller for the bedroom door, a turn order tracker for tabletop adventures, a headphone stand with a gamer tag, a gaming den sign, a neon name keychain, flags for the cables behind the desk, a card holder, a spinner that decides who goes first and a scoreboard for two. Personalised pieces for people who play.

Early Black FridaySeller plan $6 a month for your first 3 months, then $12.

A name sign with pixel hearts: pixel hearts name sign for gamers

A name sign with pixel hearts

On the pixel hearts name sign

PLAYER 1 across the top, the name in chunky pixel letters, and under it a row of up to eight pixel hearts for lives, as many full as you set. It stands on two slot-on feet or goes on a door.

Personalise this
A controller for the bedroom door: gamepad name sign for gamers

A controller for the bedroom door

On the gamepad name sign

A plain controller shape of our own, with two grips, a cross of direction buttons, four round buttons and two sticks, and a bar from grip to grip that says LIAM'S GAME ZONE. 130 to 240 mm across, with a hole to hang it by.

Personalise this
A turn order tracker for tabletop adventures: turn order tracker for gamers

A turn order tracker for tabletop adventures

On the turn order tracker

A rail with four to eight numbered places and a tile for every character, the heroes by name and up to eight monsters by number. Tiles drop into shallow pockets and lift out to move, and the group's name runs along the top.

Personalise this
A headphone stand with a gamer tag: headphone stand for gamers

A headphone stand with a gamer tag

On the headphone stand

A wide domed cradle that spreads the headband so it keeps its shape, on a post up to 225 mm tall, with the name or gamer tag raised on the broad foot.

Personalise this
A controller stand with a sunset behind it: sunset controller stand for gamers

A controller stand with a sunset behind it

On the sunset controller stand

A striped sun with two palms against it, a rail across the front with the player's name, and two side rails the controller rests on. Four flat pieces that slot together with no glue, and it fits any controller.

Personalise this
A stand for the game being played: now playing case stand for gamers

A stand for the game being played

On the now playing case stand

The case leans in a slot cut to its thickness, cover out, with NOW PLAYING and a name raised on the block in front. One slot, or two or three for the games waiting behind.

Personalise this
A cheat code keychain: cheat code keychain for gamers

A cheat code keychain

On the cheat code keychain

A row of arrows and buttons typed as letters, and under it what the code is for: INFINITE LIVES, UNLOCKS THE FRONT DOOR, DAD MODE. Up to twelve presses.

Personalise this
A number plate of their own: sunset vanity plate for gamers

A number plate of their own

On the sunset vanity plate

Big letters, a made-up place across the top, a motto or a date along the bottom and a setting sun with a palm. It leans in a low foot or hangs by its corner holes.

Personalise this
A controller hook for the wall: controller wall hook for gamers

A controller hook for the wall

On the controller wall hook

A plate with the name high on it and two prongs the controller rests across, leaning up towards the wall with a flared tip. One controller, two one above the other, or a headset on a wide prong.

Personalise this
A name under a city at sunset: skyline sunset name sign for gamers

A name under a city at sunset

On the skyline sunset name sign

A row of towers with lit windows, a striped sun going down behind them and a palm at each end, on a strip that carries the name. 150 to 240 mm across, leaning in a low foot.

Personalise this
A loading bar for a long game: loading bar progress board for gamers

A loading bar for a long game

On the loading bar progress board

A row of four to twelve slots under a title, and a tile to press in each time a piece is done. Ten slots in percent follow a story from 10% to 100%.

Personalise this
A name keychain in sunset colours: sunset layer name keychain for gamers

A name keychain in sunset colours

On the sunset layer name keychain

Bold capitals with a thick dark outline, pink below and orange above, and a row of five stars with as many filled as you choose. Three colours on any printer, with two filament changes.

Personalise this
The same lettering for the desk: sunset layer name sign for gamers

The same lettering for the desk

On the sunset layer name sign

Big outlined capitals split in two colours like a sunset sky, with a palm at each end, leaning in a low foot. A long name comes out smaller to fit the bed.

Personalise this
A sunset coaster with a name: sunset palm coaster for gamers

A sunset coaster with a name

On the sunset palm coaster

A striped sun going down, a palm against it and a name underneath, round or square, with a raised rim. One for every player on a launch night.

Personalise this
A sign for the gaming den: den pub sign for gamers

A sign for the gaming den

On the den pub sign

A shield with a controller over THE GAMING DEN and a house rule along the bottom. Two holes at the top take small chains or hooks, or it sits flat on the door.

Personalise this
A neon name keychain: neon name keychain for gamers

A neon name keychain

On the neon name keychain

The name drawn as a thin raised outline on a pill-shaped plate, like a small neon sign. A dark plate with a bright outline gives the look, and the plate sizes itself to the name.

Personalise this
Flags for the cables behind the desk: cable name flag for gamers

Flags for the cables behind the desk

On the cable name flag

A flag that names a cable and reads from both sides. The cable clicks into two round notches in its top edge, so there is no clip to break, and it fits cables from 2.5 to 9 mm.

Personalise this
A card holder with a name: card hand holder for gamers

A card holder with a name

On the card hand holder

A rack that holds a hand of cards upright, with the player's name along the front. Widen the slot to about 3 mm for sleeved cards. Short, with one slot, it is a stand for a single card.

Personalise this
A spinner for who goes first: decision spinner for gamers

A spinner for who goes first

On the decision spinner

Three to ten wedges from a typed list, a title round the rim and an arrow to flick. For game night it settles who starts.

Personalise this
A scoreboard for two: score slider board for gamers

A scoreboard for two

On the score slider board

A name over each of two scales and a pointer under each that slides along to the score, to 5, 7, 10, 11, 15 or 21. End caps shut the pointers in, so they can't be lost.

Personalise this

Who buys

Parents and grandparents buying for a child or a teenager who plays on consoles: a pixel hearts name sign for the desk, a controller sign for the bedroom door, a headphone stand with their gamer tag on the foot. Partners buy the same pieces for a grown-up's den, with a pub sign over the door.

Tabletop players buy for their table. The friend who runs the role-playing games gets a turn order tracker with the group's names on the tiles, and the players get a card holder each.

How to offer it

Sell in two groups. The room set: the pixel hearts sign and the controller sign for the same door, with a headphone stand for the desk and cable flags for the power strip behind it. The table set: the turn order tracker, a spinner that decides who goes first and a scoreboard for two.

A neon name keychain is the small add-on, and for birthdays the pixel hearts sign takes the age in its bottom line: LEVEL 8 UNLOCKED.

Games cafés and clubs order signs with their own name, and trackers and card holders for their tables.

Tips for gamer orders

  • Print everything flat and face up, with no supports, apart from the headphone stand, which prints standing.
  • A dark base with a bright second colour looks like a screen: black with green, navy with yellow, or dark grey with teal.
  • The pixel letters and hearts are square and sharp: a 0.4 mm nozzle keeps their corners.
  • Ask for the gamer tag exactly as it is spelt, with any underscores and numbers.
  • For a tracker, ask for every character's name and how many monster tiles.

Read more

Questions

How do the signs print?

Flat and face up, with no supports. The pixel hearts sign, the controller sign and the den sign are two colours stacked in layers, with one filament change when the letters or buttons start.

How many colours does the turn order tracker need?

Three filaments on an ordinary printer: the rail with one change for the numbers, and the tiles printed on their own with a change for the names.

Does the headphone stand need glue?

On a single-spool printer, the name tile prints flat on its own and presses into a pocket in the foot, and a drop of glue keeps it. With a multi-colour printer, pick that version in the studio and it prints in one piece.

Is the controller sign a copy of a real one?

No. It is a plain controller shape of our own and carries no maker's name, logo or button symbols. The turn order tracker carries no game's name or artwork unless you type one.

Can I make one for every player in a group or a club?

Yes. On the Seller plan, paste the names into a bulk order, one per line, and each piece comes out with its own name. The Seller plan also covers selling the prints.

More ideas

Start taking these orders today

Type your customer's text, send them the picture, download the print file.

Start with this idea

Early Black Fridaythrough Nov 30 (US Pacific time)

The Seller plan at $12 $6 a month

For your first 3 months, then $12. Every design, bulk lists, and the right to sell your prints. Comes off at checkout, no code needed.

Get the Seller plan