Home gym gifts to 3D print: a PR board, a medal hanger and a workout week
Three home gym gifts for someone starting or restarting in January: a PR board for the home gym with record tiles that slide in, a medal hanger with their name, and a slider chart for the week's workouts. What each does, what to ask for, and how they print.
Exercise is near the top of every New Year list. In YouGov's survey of Americans' plans for 2026, exercising more was the most common resolution, chosen by 25%, ahead of eating healthier and saving money. Keeping it up is the harder part.
The NHS guidelines give a sensible target to aim for: adults should do strengthening activities on at least 2 days a week and at least 150 minutes of moderate activity, spread over 4 to 5 days. A plan like that is easier to stick to when it's on the wall, and progress is easier to notice when it's written down.
So the home gym gifts that help are simple: somewhere to see progress, somewhere to keep the medals, and a reminder of which days are gym days. These three prints do that, each with the lifter's own name on it, for weightlifters, runners and anyone restarting after a break.
A PR board for the home gym
The PR record board has a row for each lift, up to six, with the lift's name on the left and the best weight on tiles that slide into a channel, one digit per tile. An end cap with the unit on it closes each row: KG, LB, MIN or KM.
The point is that a record is only a record until the next one. When the squat goes from 140 to 145, one tile changes, not the board. The tiles can't fall out: the channel is wider at the bottom than at the top, so they only leave through the open end, and the end cap is a snug fit there.
It isn't only for lifting. Type 5K, 10K and HALF with times for a runner, a swimmer's lengths, or a gym's members with their best. A dumbbell, a kettlebell, a runner, a bike, a swimmer or a trophy can sit beside the heading.
To give it as a present, ask for the lifts, today's numbers and the unit. Print a spare set of digit tiles with it (0123456789 twice covers most changes), so the next record doesn't need a new order.
Gifts for weightlifters who also race
Some lifters also run a 10K in spring or swim in summer. The medal hanger puts their name along the top of a bar, cut to the outline of the letters, with flat hooks underneath for the ribbons. The hooks are part of the same print, and the hanger comes with printed spacer rings that hold it 8 mm off the wall so ribbons pass behind the hooks. A 240 mm hanger with five hooks holds 15 to 20 medals.
Hung beside the PR board, it makes the wall of the home gym about the person who trains there. There is more on the hanger in a personalised medal hanger to 3D print.
A workout week on the wall
The slider chore chart was made for children's jobs, but change the words and it tracks a training week. Put MON to SUN as the rows, REST and GYM over the two places, and a star on each slider. On a training day the slider moves from REST to GYM; on Sunday night they all slide back.
There are no pens or magnets to lose: the sliders run in closed channels with end caps. It is a small thing, but a row of sliders on the GYM side by Friday is satisfying to look at, and the empty ones are hard to ignore.
How they print
All three print flat, face up, with no supports, and the colours are stacked layers with a filament change, so a single-spool printer does the job.
- PR board: the board on one plate and the tiles on another, each in two colours with one filament change. Black with yellow or white reads like a gym scoreboard. Print one tile first to check the fit.
- Medal hanger: the hanger and spacer rings in the first colour, the name and words in the second. Use PETG or a tough PLA with four walls; a full hanger is heavy.
- Workout chart: the board on one plate, the sliders and caps on a second plate in their own colour.
A garage can get cold and damp in winter, and hot in summer: Prusa notes that PLA softens above about 60 °C, so PETG is the safer choice for anything going out there.
Selling them as a set
Around New Year, offer them as a set: the board, the hanger and the chart in the same two colours, each with the buyer's name. Ask for the lifts and numbers, the unit, the sport, and the days they want to train. For gyms and CrossFit boxes, offer a big PR board for the wall with members' names as the rows.
The sports clubs and gyms page has the rest of the range for clubs: medals, kit bag tags and locker tags.
Planning what to make next? Browse personalised print ideas by occasion, or work out prices, party orders and colour changes with the free maker tools.