New home labels: stopcock tags, switch labels and key tags
Moving in is the one time you can label everything once: a tag on the stopcock, tags on the pipes and valves, a strip over the switches, key tags, and picture labels for the bins. What each piece does and how to print them.
The time to find the stopcock is before the water is on the floor. In a new home nobody knows where anything is, and the first week, with the boxes still open, is the time to fix that.
What to find in the first week
Start with the water. The plumbing register WaterSafe says the internal stop tap is usually where the supply pipe enters the house, most often under the kitchen sink, under the stairs, or in a garage, utility room or bathroom, and advises checking that it turns easily before you need it in an emergency. Water companies such as Wessex Water also explain where the outside stop tap is and when to use it.
Then the rest: the boiler's switch, which switch on a long plate runs which light or fan, which of the keys the previous owners left opens what, and which bin is which. A stopcock tag, a few pipe identification tags, a strip over the switches and labels on the keys and bins cover most of it, labelled once while you are finding things anyway.
Stopcock tags and pipe identification tags
The utility tag set makes a tag with a big hole for each word you type: WATER MAIN on the stopcock, GAS, HOT and COLD on the pipes, BOILER on the switch, GARDEN TAP. Up to sixteen tags come from one typed list, each word as large as its tag allows.
The tags are typed as one list with commas between them. A full stop inside a tag starts a second, smaller line, for what to do: WATER MAIN . TURN TO CLOSE.
They come round, as rounded rectangles, or as arrows that point at the thing they name. The hole runs from 4 to 22 mm, so a tag can hang from a cable tie, a ring or a small pipe.
Where a tag can go, and where it can't
A tag should not go directly on a hot pipe. Prusa's material guides put PLA's limit at about 60 °C and PETG's at about 80 °C, and the HSE's legionella guidance has stored hot water kept at 60 °C or more, so a hot or heating pipe can be at or above either limit. Tie the tag to the valve's handle or to a cool part nearby with a cable tie.
The tags are a household reminder, not a substitute for proper labelling. Gas and electrical installations have their own required labels, which a qualified installer provides.
Red for hot, blue for cold
The whole set prints in one colour pair. For red hot tags and blue cold ones, print the list once in red with only the hot tags, and once in blue with the cold ones. Red for hot and blue for cold match the usual tap markings.
Key tags from the same set
Change the shape to a rounded rectangle, shrink it and use a small hole, and the same design makes key tags. One example on the page is SHED, GARAGE, BACK DOOR, BIKE LOCK at 40 mm with a 5 mm hole: every key the previous owners handed over in a bag, named once.
Switch labels
The switch label is a thin strip that sticks above a row of switches and names each one, with a small picture over every word: a fan, a bulb, a flame, a snowflake. Type the names left to right, one per switch, separated by commas, and the strip is spaced to match the board, for one to eight switches. Leave a gap in the list for a switch that needs no name and the dividers still line up.
To get the spacing, measure from the middle of the first switch to the middle of the last and divide by one less than the number of switches. It sticks on with thin double-sided foam tape on a plate cleaned with a little alcohol. Our post on switchboard labels has more.
Bin labels
The recycling bin labels give each bin a word and a picture chosen from the word: PAPER gets a sheet, GLASS a bottle, CANS a tin, FOOD an apple core. Anything it doesn't know gets the three recycling arrows. They fix with outdoor double-sided tape or tie on through two holes, and they go in PETG for bins that live outside.
Printing them
Everything here prints flat, face up, with no supports, in two colours stacked in layers: the tags or strip first, then the words on top after one filament change. No multi-colour printer is needed. A plate takes sixteen round tags at the standard size.
For sellers
Selling these comes with the Seller plan. Landlords and tradespeople may want a set of tags per property; householders a new-home pack of tags with switch labels. Offices, schools and cafés need bin labels by the bin station.
The labels and organising the home page has the rest of the range.
Planning what to make next? Browse personalised print ideas by occasion, or work out prices, party orders and colour changes with the free maker tools.