Personalised balloon weights to 3D print: the age, the name, and coins sealed inside

Every bunch of helium balloons needs a weight, and it's usually a foil lump under the table. A printed one with the child's age and name sits on the cake table instead. How the coins get sealed in at a pause, how the ribbons attach, and how to sell it with the rest of the party.

Personalised balloon weights to 3D print: the age, the name, and coins sealed inside

Helium balloons have to be tied to something heavier than their lift. The numbers are small: air weighs about 1.29 g per litre and helium about 0.18 g, so each litre of helium lifts roughly a gram, less the weight of the balloon and ribbon. A bunch of party balloons pulls with tens of grams, and a weight needs comfortably more than that so a draught or a tug doesn't drag it off the table.

Foil balloons need the most care. Their metallic coating conducts electricity, and in California, where released balloons regularly cause power cuts, Southern California Edison reminds buyers that metallic balloons should always be tied to a weight, as state law requires, and never released outdoors.

At most parties the weight is a foil-wrapped lump from the balloon shop or a bag of sand under the table. The balloon weight is one you can leave on show: the age big in the middle, the child's name underneath, in the party's colours. It holds the balloons on the day and sits on a shelf afterwards.

Coins sealed inside

A printed piece is light, so the weight comes from inside. The balloon weight is thick, with one, three or four round pockets in it. When the printer reaches the top of the pockets it pauses. Drop in coins, washers or nuts, press resume, and the next layers print the lid over them. The weight is sealed in for good: nothing rattles and nothing falls out.

  • The Bambu 3MF from the studio has the pause in it already. With an STL, add a pause at the pockets' top in your slicer; with the default pockets it's at 9.6 mm.
  • The pockets are 28 mm across and 8 mm deep by default, which takes a stack of most coins up to 27 mm. Set the width and depth to match what you have.
  • A US quarter weighs 5.67 g, so a dozen add about 68 g, enough for a small bunch of latex balloons; heavier coins add more. For a big bunch or a large foil number, use steel washers or nuts and four pockets.
  • If you'd rather not pause, pick no pockets and print it solid. The Bambu 3MF sets 100% infill by itself; with an STL, set it in your slicer.

Ribbons that can be adjusted

A tab on top has a slot: thread the ribbons through and tie them round the bar above it. Beside the slot is a notch that narrows to a pinch. Wrap a ribbon and pull it into the notch to set the balloon's height, and pull it out again to change it, with no knots to undo.

Four shapes

  • Flower: eight round petals, for children's birthdays.
  • Circle: plain and roomy, with space for a year such as 2027 at New Year's Eve.
  • Heart: for 18ths, anniversaries and Valentine's.
  • Star: for first birthdays.

The age (or a year, or an initial) goes big in the middle, with the name or HAPPY BIRTHDAY under it.

Printing tips

  • Print face up. The pause comes first; then change filament where the lettering starts.
  • Use at least three walls so the pockets have solid sides.
  • Keep the coins level with or below the top of the pockets, so the nozzle clears them.

How to sell it

Sell it in a birthday set: name bunting with MILA TURNS 5 for the wall, an arched cake topper with the same name, and the balloon weight on the cake table. For a 30th or a 50th, add party glasses with the number on the band for the photos.

Shops are a second market: a star with the shop's name holds the balloons by the door on opening day and at every sale after.

The birthday party favours ideas page has the weight with the rest of a party's pieces, and our post on name bunting covers the garland.

Planning what to make next? Browse personalised print ideas by occasion, or work out prices, party orders and colour changes with the free maker tools.

Take your next custom order in minutes

Type your customer's text, send them a picture to approve, download a print-ready file.

Start selling

Keep reading