A personalised photo frame with the name in the frame, to 3D print for Christmas

A photo frame with the family's name let into its lower edge, flush with the face, in the colour of the frame's body. The five photograph sizes, how it prints face down, why there is no glass, and who buys one at Christmas.

A personalised photo frame with the name in the frame, to 3D print for Christmas

Before choosing a photo frame, check the print size. Most home and shop prints follow a few standard sizes: 4 x 6 inches (often called 4R, the size of a 10 x 15 cm print), 5 x 7 inches (5R, close to 13 x 18 cm) and so on up, as the table of photo print sizes shows. Inch and metric sizes are close but not identical, so a frame made for one may be loose or tight for the other.

The second thing is the photograph itself. A frame on a shelf exposes the print to light, and the Library of Congress's photo care guide advises limiting light exposure and keeping prints away from heat and damp. Frame a reprint rather than the only copy of an old photograph, and keep it out of direct sun.

A family name picture frame makes a simple Christmas present, since most families have a photograph they want on the shelf. Most frames carry the name on a stuck-on plate or a print that rubs off. A 3D printed frame can put the name into the frame itself.

The name is part of the frame

The photo frame with a name in the frame has the family's name let into its lower edge: THE JOHNSONS under the holiday photograph, EMMA under the school one. The name is not raised on top. The frame's face is one colour with the name left out of it, and the body behind it is a second colour that shows through the letters. The name ends up flush with the face, as flat as the rest of the frame, so there is no raised edge to catch and wear.

A second line can run along the top: a date for a wedding or a new baby, CLASS OF 2027 for a school photograph, a place for a holiday. Leave it empty and the top stays plain.

Sizes and which way up

There are five photograph sizes:

  • 4 x 6 inches
  • 5 x 7 inches
  • 6 x 8 inches
  • 10 x 15 cm
  • 13 x 18 cm

Each can be upright or on its side. A fine line let into the face round the window is on by default and can be turned off. The frame leans back on two feet that slot into its lower edge, so it stands on a shelf, a desk or a mantelpiece.

The photograph drops into a recess in the back, and a thin backing plate clicks past two small ridges to hold it in.

There is no glass

The photograph sits behind the frame's lip with nothing over it, which keeps reflections away. For a photograph that small hands will touch, a sheet of clear acetate in front of it does the job of glass. Say so when you give it or sell it, so nobody goes looking for the glass.

Printing it

The frame prints face down, so the face takes the finish of the printer's bed. Use a clean, smooth plate. It prints in bands: first the thin face in one colour with the name left out, then one filament change, then the body in a second colour, which fills the letters from behind.

It needs up to three filaments: the face, the body, and the backing with the feet, which print together on a second plate. Print the backing and feet in the body's colour and it is two. Everything prints flat, with no supports and no glue.

If the backing is tight on your printer, raise the fit setting and reprint the backing. If it is loose, a strip of tape across the back holds it.

Who it is for

  • Grandparents. A frame for each family's photograph, each with that family's name, makes a row on their shelf. The gifts for grandparents page has more for them.
  • Weddings and anniversaries. Both names along the bottom and the date along the top, as in the LIAM & OLIVIA example on the design page.
  • New babies. The baby's name and birth date round the first photograph.
  • School photographs. A child's name under this year's picture.

Pieces that go with it

Two more designs carry the family's name for the same shelf or wall. The split monogram sign is a big initial with the name on a band across its middle, the name let into the band in the same way; the post on split letter monograms covers it in full. For Christmas itself, the family name Christmas tree has one bauble per name, the family's name round the pot and the year on the star.

Selling frames at Christmas

Ask for the name exactly as it should read, the photograph's size and which way up. Some buyers want a wall of family frames in different sizes; make each one as its own order. For a school or a club with a photograph of each child, paste the first names one per line into a bulk order. Bulk orders and the right to sell the prints come with the Seller plan.

Print the frame face down on your smoothest plate and send a picture of the finished face before posting. The face is what the buyer sees first.

Planning what to make next? Browse personalised print ideas by occasion, or work out prices, party orders and colour changes with the free maker tools.

Take your next custom order in minutes

Type your customer's text, send them a picture to approve, download a print-ready file.

Start selling

Keep reading