Restroom and toilet door signs to 3D print for cafés, salons and offices
A restroom sign with a clear picture, a word under it and an arrow if the door is round the corner: two people, one person, a family, baby changing or a shower. What you can change, how it fixes on, what it is not, and the signs that go with it.
A restroom sign has two jobs: telling people where the toilets are from across the room, and telling someone who can't see well which door is which. In the US the second job is regulated. Under the 2010 ADA Standards, signs labelling permanent rooms, restrooms included, must meet both visual and tactile rules: raised characters repeated in Grade 2 braille, a non-glare finish, colour contrast, and mounting beside or on the door with the tactile text between 48 and 60 inches from the floor (US Access Board guide). Other countries have their own rules, so check what applies before fitting signs in a business.
This post is about the first job: a toilet door sign for a café, a salon or an office floor that you can 3D print in the place's own colours, including a baby changing sign for the door that has the table.
What the restroom door sign is
The restroom door sign is one flat plate with a picture on it, a word under the picture and, if you want one, an arrow. There are five pictures: two people side by side, one person, a family of three, a baby on a changing table, and a shower. Or choose no picture and have the word alone, large.
The word is your own. RESTROOM, TOILETS, WC and STAFF ONLY all work, and a small second line can go under it. The word can be in any language the fonts cover, including Hindi with the Devanagari font.
Shapes, sizes and arrows
The plate comes as a rounded square, a round sign or a tall plate, from 80 to 220 mm across. The arrow points left or right, for the sign at the end of a corridor that says the door is round the corner. A tall plate with a family, TOILETS and an arrow to the right is one of the examples on the design page; a round baby changing sign at 120 mm is another.
How it fixes to the door
Two holes take small screws. On a door you can't drill, switch the holes off and use double-sided foam tape.
What it is not
It is a plain door sign. It has no braille or raised tactile lettering to any standard. Where the law requires a compliant tactile or braille sign, such as under the ADA Standards in the US, a sign made to that standard is needed as well. This one is the clear, matching sign people read from across the room.
Printing it
It prints flat, face up, in one piece with no supports. The colours are stacked layers: print the plate, change filament when the picture starts, and the picture and word come out in the second colour. No multi-colour printer is needed.
A dark plate with a white picture reads from furthest away. For a campsite, a pool cabin or anywhere damp, print it in PETG, which Prusa describes as water and humidity resistant.
Toilet door signs for a café, a salon or an office
The same sign suits several kinds of place, and each tends to want something a little different:
- Cafés and restaurants. A TOILETS sign on the door and a second with an arrow where the corridor turns. A baby changing sign if there is a table.
- Salons and shops. A small sign in the salon's colours, often with STAFF ONLY on the back-room door to match.
- Office floors. One person or two people, in the building's colours, with a shower sign for the cyclists' room.
- Guesthouses, holiday lets and campsites. Shower and toilet signs in PETG for the shower block.
Two more signs belong on the same doors and walls. The office door sign puts a name and job title in raised letters inside a raised rim, and goes on a small wall mount that stays put when the name changes. The please remove your shoes sign suits studios, clinics and treatment rooms as well as front halls, with a pair of shoes, boots or bare feet beside the words.
For a full set of counter and door signs, see 3D printed signs and tools for cafés and the cafés and restaurants page.
Selling them
Cafés and salons usually want these in their own colours, matching the rest of their signs. Offer the restroom sign as a set with an office door sign and a staff-only version in the same colours. Ask which pictures they need, the word and any second line, whether the door can be drilled, and which way any arrow points. Selling the prints comes with the Seller plan.
Planning what to make next? Browse personalised print ideas by occasion, or work out prices, party orders and colour changes with the free maker tools.