Digital 3D print fileDownloads as STL3MF
Logo clicker business card: a card people keep
A card-sized business card with a coin in it that clicks as it turns: your logo on the coin, your name, title and contact details beside it. Upload any logo. Prints in place with nothing to assemble.
- Clad 2 colours, 1 filament swapColours stacked in layers, like a clad coin: pause and swap filament where each colour starts. No AMS needed.
- One Strike One pieceComes off the plate ready to use, with nothing to put together.
What you download
logo-clicker-business-card-Alex-Morgan.stlFor any slicer and any 3D printerlogo-clicker-business-card-Alex-Morgan.3mfA Bambu Studio project with the colours set
Digital files only. Nothing is posted: you print it yourself, for you or for your customers.
Single files and the Party pass and Season pass are for personal use and gifts. To sell prints you need an active Seller plan or Seller year pass; prints made while it is active stay yours to sell after it ends. The digital files themselves may never be shared or sold. Read the licence
- Size
- About 86 × 54 × 5 mm (8.6 × 5.4 cm) with the example text
- You type
- Your logo, Name, Title or company, Contact line 1, Contact line 2, plus 9 more options for fine-tuning
- Colours
- 2 parts (base, text), so it prints in 2 colours or as one
- Files
- STL for any slicer, plus a two-colour Bambu Studio project
Why sellers like it
- Upload any logo: PNG, JPG or SVG
- A coin in the card that clicks as it turns
- Name, title and two contact lines
- Card sized: 86 x 54 mm, 4.8 mm thick
- Prints in place: nothing to buy or assemble
- Paste a list of names for a whole team
A card that doesn't get thrown away
Paper cards go in the bin by the end of the week. A card with something to fidget with stays on the desk: the coin turns and ticks under a thumb, with the logo on it and the name and number right beside it.
How it works
- The coin sits at the left of the card with the logo on its face, inside a raised rim.
- Three spring tongues cut in the card click against notches round the coin, 12 to 30 times a turn.
- The name stands large on the right, with a title or company under it, then a rule and two lines for a phone number, website or handle. Long lines shrink to fit; leave any line empty to drop it.
Printing tips
- Print it flat as it comes, with no supports.
- Change filament where the logo and words begin (0.8 mm under the top).
- Small contact lines print cleanest with a 0.4 mm nozzle at 0.12 to 0.16 mm layers; keep them short.
- If the first layer spreads, the coin can stick: lower the bed temperature a little or raise the fit.
Selling tips
Sell them in tens and twenties to people who hand out cards at shows and meetings. Ask for the logo as a PNG or SVG and the lines exactly as they should read. A dark card with a white or gold top colour reads best across a table.
Questions about the logo clicker business card
What logo can I use?
Any picture of it: a PNG, JPG, WebP or SVG. A logo on a plain white or see-through background works best. The studio reads it in your browser, splits it into dark and light, and shows the shape that will print; tick “Light logo on dark background” for a white logo on a coloured square. Photos and soft shadows don't work.
How does the coin click?
Three thin tongues are cut in the card round the coin, each with a small tooth on its end. The teeth drop into notches round the coin's edge, so turning it gives a tick at every notch. The coin's edge is a V in a matching groove, so it turns but can't fall out.
How does it print?
Flat on the bed, no supports, in one go: the coin prints in place in the card. Two colours stacked, the card and coin in one and the logo and words on top in the second, so one filament change does it on any printer. If the coin comes off the bed stuck, give it a firm twist; if it stays stuck, raise the fit in All options and reprint.
Is it the size of a normal business card?
Yes across, 86 x 54 mm like a bank card, so it fits a card holder on a desk. It is 4.8 mm thick, so it goes in a pocket or a bag rather than a wallet slot.
Can I make one for everyone on a team?
Yes. On the Seller plan, upload the logo once and paste the list of names for a bulk order; you get a file for each person.
Can I sell these with my customers' logos?
Yes, on the Seller plan. Only put a logo on a clicker when the customer owns it or has permission to use it.
Sellers also offer
Start selling the logo clicker business card
Type your customer's text, send them the picture, download the print file.
Early Black Fridaythrough Nov 30 (US Pacific time)
The Seller plan at $12 $6 a month
For your first 3 months, then $12. Every design, bulk lists, and the right to sell your prints. Comes off at checkout, no code needed.